ax.modelbridge¶

Generation Strategy, Registry, and Factory¶

Generation Strategy¶

class ax.modelbridge.generation_strategy.GenerationStrategy(steps: Optional[List[GenerationStep]] = None, name: Optional[str] = None, nodes: Optional[List[GenerationNode]] = None)[source]¶

Bases: GenerationStrategyInterface

GenerationStrategy describes which model should be used to generate new points for which trials, enabling and automating use of different models throughout the optimization process. For instance, it allows to use one model for the initialization trials, and another one for all subsequent trials. In the general case, this allows to automate use of an arbitrary number of models to generate an arbitrary numbers of trials described in the trials_per_model argument.

Parameters:

steps – A list of GenerationStep describing steps of this strategy.
name – An optional name for this generaiton strategy. If not specified, strategy’s name will be names of its steps’ models joined with ‘+’.

clone_reset() → GenerationStrategy[source]¶: Copy this generation strategy without it’s state.

current_generator_run_limit() → Tuple[int, bool][source]¶

First check if we can move the generation strategy to the next , which is safe, as the next call to gen will just pick up from there. Then determine how many generator runs this generation strategy can generate right now, assuming each one of them becomes its own trial, and whether optimization is completed.

Returns: a two-item tuple of:

the number of generator runs that can currently be produced, with -1 meaning unlimited generator runs,
whether optimization is completed and the generation strategy cannot generate any more generator runs at all.

property current_node: GenerationNode¶: Current generation node.

property current_step: GenerationStep¶: Current generation step.

property current_step_index: int¶: Returns the index of the current generation step. This attribute is replaced by node_name in newer GenerationStrategies but surfaced here for backward compatibility.

property experiment: Experiment¶: Experiment, currently set on this generation strategy.

gen(experiment: Experiment, data: Optional[Data] = None, n: int = 1, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, **kwargs: Any) → GeneratorRun[source]¶

Produce the next points in the experiment. Additional kwargs passed to this method are propagated directly to the underlying model’s gen, along with the model_gen_kwargs set on the current generation node.

NOTE: Each generator run returned from this function must become a single trial on the experiment to comply with assumptions made in generation strategy. Do not split one generator run produced from generation strategy into multiple trials (never making a generator run into a trial is allowed).

Parameters:

experiment – Experiment, for which the generation strategy is producing a new generator run in the course of gen, and to which that generator run will be added as trial(s). Information stored on the experiment (e.g., trial statuses) is used to determine which model will be used to produce the generator run returned from this method.
data – Optional data to be passed to the underlying model’s gen, which is called within this method and actually produces the resulting generator run. By default, data is all data on the experiment.
n – Integer representing how many arms should be in the generator run produced by this method. NOTE: Some underlying models may ignore the n and produce a model-determined number of arms. In that case this method will also output a generator run with number of arms that can differ from n.
pending_observations – A map from metric name to pending observations for that metric, used by some models to avoid resuggesting points that are currently being evaluated.

gen_for_multiple_trials_with_multiple_models(experiment: Experiment, num_generator_runs: int, data: Optional[Data] = None, n: int = 1) → List[List[GeneratorRun]][source]¶

Produce GeneratorRuns for multiple trials at once with the possibility of ensembling, or using multiple models per trial, getting multiple GeneratorRuns per trial.

NOTE: This method is in development. Please do not use it yet.

Parameters:

experiment – Experiment, for which the generation strategy is producing a new generator run in the course of gen, and to which that generator run will be added as trial(s). Information stored on the experiment (e.g., trial statuses) is used to determine which model will be used to produce the generator run returned from this method.
data – Optional data to be passed to the underlying model’s gen, which is called within this method and actually produces the resulting generator run. By default, data is all data on the experiment.
n – Integer representing how many trials should be in the generator run produced by this method. NOTE: Some underlying models may ignore the n and produce a model-determined number of arms. In that case this method will also output a generator run with number of arms that can differ from n.
pending_observations – A map from metric name to pending observations for that metric, used by some models to avoid resuggesting points that are currently being evaluated.

Returns:

A list of lists of lists generator runs. Each outer list represents a trial being suggested and each inner list represents a generator run for that trial.

is_node_based(nodes: List[GenerationNode]) → bool[source]¶: Whether this strategy consists of GenerationNodes or GenerationSteps. This is useful for determining initialization properties and other logic.

property model: Optional[ModelBridge]¶: Current model in this strategy. Returns None if no model has been set yet (i.e., if no generator runs have been produced from this GS).

property model_transitions: List[int]¶: List of trial indices where a transition happened from one model to another.

property name: str¶: Name of this generation strategy. Defaults to a combination of model names provided in generation steps.

property trials_as_df: Optional[pandas.DataFrame]¶: Puts information on individual trials into a data frame for easy viewing. For example: Gen. Step | Model | Trial Index | Trial Status | Arm Parameterizations 0 | Sobol | 0 | RUNNING | {“0_0”:{“x”:9.17…}}

property uses_non_registered_models: bool¶: Whether this generation strategy involves models that are not registered and therefore cannot be stored.

ax.modelbridge.generation_strategy.step_based_gs_only(f: Callable[[...], T]) → Callable[[...], T][source]¶: For use as a decorator on functions only implemented for GenerationStep based GenerationStrategies. Mainly useful for older GenerationStrategies.

Generation Node¶

class ax.modelbridge.generation_node.GenerationNode(node_name: str, model_specs: List[ModelSpec], best_model_selector: Optional[BestModelSelector] = None, should_deduplicate: bool = False, transition_criteria: Optional[Sequence[TransitionCriterion]] = None, gen_unlimited_trials: bool = True)[source]¶

Bases: object

Base class for GenerationNode, capable of fitting one or more model specs under the hood and generating candidates from them.

Parameters:

model_specs – A list of ModelSpecs to be selected from for generation in this GenerationNode
should_deduplicate – Whether to deduplicate the parameters of proposed arms against those of previous arms via rejection sampling. If this is True, the GenerationStrategy will discard generator runs produced from the GenerationNode that has should_deduplicate=True if they contain arms already present on the experiment and replace them with new generator runs. If no generator run with entirely unique arms could be produced in 5 attempts, a GenerationStrategyRepeatedPoints error will be raised, as we assume that the optimization converged when the model can no longer suggest unique arms.
node_name – A unique name for the GenerationNode. Used for storage purposes.
transition_criteria – List of TransitionCriterion, each of which describes a condition that must be met before completing a GenerationNode. All is_met must evaluateTrue for the GenerationStrategy to move on to the next GenerationNode.
gen_unlimited_trials – If True the number of trials that can be generated from this GenerationNode is unlimited.

Note for developers: by “model” here we really mean an Ax ModelBridge object, which contains an Ax Model under the hood. We call it “model” here to simplify and focus on explaining the logic of GenerationStep and GenerationStrategy.

property cv_results: Optional[List[CVResult]]¶: cv_results from self.model_spec_to_gen_from for convenience

property diagnostics: Optional[Dict[str, Dict[str, float]]]¶: diagnostics from self.model_spec_to_gen_from for convenience

property experiment: Experiment¶: Returns the experiment associated with this GenerationStrategy

fit(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, **kwargs: Any) → None[source]¶

Fits the specified models to the given experiment + data using the model kwargs set on each corresponding model spec and the kwargs passed to this method.

NOTE: Local kwargs take precedence over the ones stored in ModelSpec.model_kwargs.

property fitted_model: ModelBridge¶: fitted_model from self.model_spec_to_gen_from for convenience

property fixed_features: Optional[ObservationFeatures]¶: fixed_features from self.model_spec_to_gen_from for convenience

gen(n: Optional[int] = None, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, max_gen_draws_for_deduplication: int = 5, arms_by_signature_for_deduplication: Optional[Dict[str, Arm]] = None, **model_gen_kwargs: Any) → GeneratorRun[source]¶

Picks a fitted model, from which to generate candidates (via self._pick_fitted_model_to_gen_from) and generates candidates from it. Uses the model_gen_kwargs set on the selected ModelSpec alongside any kwargs passed in to this function (with local kwargs) taking precedent.

Parameters:

n – Optional nteger representing how many arms should be in the generator run produced by this method. When this is None, n will be determined by the ModelSpec that we are generating from.
pending_observations – A map from metric name to pending observations for that metric, used by some models to avoid resuggesting points that are currently being evaluated.
max_gen_draws_for_deduplication – TODO
model_gen_kwargs – Keyword arguments, passed through to ModelSpec.gen; these override any pre-specified in ModelSpec.model_gen_kwargs.

NOTE: Models must have been fit prior to calling gen. NOTE: Some underlying models may ignore the n argument and produce a

model-determined number of arms. In that case this method will also output a generator run with number of arms (that can differ from n).

property gen_unlimited_trials: bool¶: If True, this GenerationNode can generate unlimited trials.

property generation_strategy: GenerationStrategy¶: Returns a backpointer to the GenerationStrategy, useful for obtaining the experiment associated with this GenerationStrategy

generator_run_limit(supress_generation_errors: bool = True) → int[source]¶

How many generator runs can this generation strategy generate right now, assuming each one of them becomes its own trial. Only considers transition_criteria that are TrialBasedCriterion.

Returns:

the number of generator runs that can currently be produced, with -1 meaning unlimited generator runs,

property is_completed: bool¶: Returns True if this GenerationNode is complete and should transition to the next node.

property model_cv_kwargs: Optional[Dict[str, Any]]¶: model_cv_kwargs from self.model_spec_to_gen_from for convenience

property model_enum: ModelRegistryBase¶: model_enum from self.model_spec_to_gen_from for convenience

property model_gen_kwargs: Optional[Dict[str, Any]]¶: model_gen_kwargs from self.model_spec_to_gen_from for convenience

property model_kwargs: Optional[Dict[str, Any]]¶: model_kwargs from self.model_spec_to_gen_from for convenience

property model_spec_to_gen_from: ModelSpec¶: Returns the cached _model_spec_to_gen_from or gets it from _pick_fitted_model_to_gen_from and then caches and returns it

model_specs: List[ModelSpec]¶

property model_to_gen_from_name: Optional[str]¶: Returns the name of the model that will be used for gen, if there is one. Otherwise, returns None.

property node_name: str¶: Returns the unique name of this GenerationNode

should_deduplicate: bool¶

should_transition_to_next_node(raise_data_required_error: bool = True) → Tuple[bool, Optional[str]][source]¶

Checks whether we should transition to the next node based on this node’s TransitionCriterion

Parameters:: raise_data_required_error – Whether to raise DataRequiredError in the case detailed above. Not raising the error is useful if just looking to check how many generator runs (to be made into trials) can be produced, but not actually producing them yet.
Returns:: Whether we should transition to the next node.
Return type:: bool

property transition_criteria: Sequence[TransitionCriterion]¶: Returns the sequence of TransitionCriteria that will be used to determine if this GenerationNode is complete and should transition to the next node.

property trials_from_node: Set[int]¶

Returns a dictionary mapping a GenerationNode to the trials it generated.

Returns:: A set containing all the trials indices generated by this node.
Return type:: Set[int]

class ax.modelbridge.generation_node.GenerationStep(model: ~typing.Union[~ax.modelbridge.registry.ModelRegistryBase, ~typing.Callable[[...], ~ax.modelbridge.base.ModelBridge]], num_trials: int, model_kwargs: ~typing.Optional[~typing.Dict[str, ~typing.Any]] = None, model_gen_kwargs: ~typing.Optional[~typing.Dict[str, ~typing.Any]] = None, completion_criteria: ~typing.Sequence[~ax.modelbridge.transition_criterion.TransitionCriterion] = <factory>, min_trials_observed: int = 0, max_parallelism: ~typing.Optional[int] = None, use_update: bool = False, enforce_num_trials: bool = True, should_deduplicate: bool = False, index: int = -1, model_name: str = <factory>)[source]¶

Bases: GenerationNode, SortableBase

One step in the generation strategy, corresponds to a single model. Describes the model, how many trials will be generated with this model, what minimum number of observations is required to proceed to the next model, etc.

NOTE: Model can be specified either from the model registry (ax.modelbridge.registry.Models or using a callable model constructor. Only models from the registry can be saved, and thus optimization can only be resumed if interrupted when using models from the registry.

Parameters:

model – A member of Models enum or a callable returning an instance of ModelBridge with an instantiated underlying Model. Refer to ax/modelbridge/factory.py for examples of such callables.
num_trials – How many trials to generate with the model from this step. If set to -1, trials will continue to be generated from this model as long as generation_strategy.gen is called (available only for the last of the generation steps).
min_trials_observed – How many trials must be completed before the generation strategy can proceed to the next step. Defaults to 0. If num_trials of a given step have been generated but min_trials_ observed have not been completed, a call to generation_strategy.gen will fail with a DataRequiredError.
max_parallelism – How many trials generated in the course of this step are allowed to be run (i.e. have trial.status of RUNNING) simultaneously. If max_parallelism trials from this step are already running, a call to generation_strategy.gen will fail with a MaxParallelismReached Exception, indicating that more trials need to be completed before generating and running next trials.
use_update – DEPRECATED.
enforce_num_trials – Whether to enforce that only num_trials are generated from the given step. If False and num_trials have been generated, but min_trials_observed have not been completed, generation_strategy.gen will continue generating trials from the current step, exceeding num_ trials for it. Allows to avoid DataRequiredError, but delays proceeding to next generation step.
model_kwargs – Dictionary of kwargs to pass into the model constructor on instantiation. E.g. if model is Models.SOBOL, kwargs will be applied as Models.SOBOL(**model_kwargs); if model is get_sobol, get_sobol( **model_kwargs). NOTE: if generation strategy is interrupted and resumed from a stored snapshot and its last used model has state saved on its generator runs, model_kwargs is updated with the state dict of the model, retrieved from the last generator run of this generation strategy.
model_gen_kwargs – Each call to generation_strategy.gen performs a call to the step’s model’s gen under the hood; model_gen_kwargs will be passed to the model’s gen like so: model.gen(**model_gen_kwargs).
completion_criteria – List of TransitionCriterion. All is_met must evaluate True for the GenerationStrategy to move on to the next Step
index – Index of this generation step, for use internally in Generation Strategy. Do not assign as it will be reassigned when instantiating GenerationStrategy with a list of its steps.
should_deduplicate – Whether to deduplicate the parameters of proposed arms against those of previous arms via rejection sampling. If this is True, the generation strategy will discard generator runs produced from the generation step that has should_deduplicate=True if they contain arms already present on the experiment and replace them with new generator runs. If no generator run with entirely unique arms could be produced in 5 attempts, a GenerationStrategyRepeatedPoints error will be raised, as we assume that the optimization converged when the model can no longer suggest unique arms.

Note for developers: by “model” here we really mean an Ax ModelBridge object, which contains an Ax Model under the hood. We call it “model” here to simplify and focus on explaining the logic of GenerationStep and GenerationStrategy.

completion_criteria: Sequence[TransitionCriterion]¶

enforce_num_trials: bool = True¶

gen(n: Optional[int] = None, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, max_gen_draws_for_deduplication: int = 5, arms_by_signature_for_deduplication: Optional[Dict[str, Arm]] = None, **model_gen_kwargs: Any) → GeneratorRun[source]¶

Picks a fitted model, from which to generate candidates (via self._pick_fitted_model_to_gen_from) and generates candidates from it. Uses the model_gen_kwargs set on the selected ModelSpec alongside any kwargs passed in to this function (with local kwargs) taking precedent.

Parameters:

n – Optional nteger representing how many arms should be in the generator run produced by this method. When this is None, n will be determined by the ModelSpec that we are generating from.
pending_observations – A map from metric name to pending observations for that metric, used by some models to avoid resuggesting points that are currently being evaluated.
max_gen_draws_for_deduplication – TODO
model_gen_kwargs – Keyword arguments, passed through to ModelSpec.gen; these override any pre-specified in ModelSpec.model_gen_kwargs.

NOTE: Models must have been fit prior to calling gen. NOTE: Some underlying models may ignore the n argument and produce a

model-determined number of arms. In that case this method will also output a generator run with number of arms (that can differ from n).

get_generator_run_limit() → int[source]¶

How many generator runs can this generation strategy generate right now, assuming each one of them becomes its own trial, and whether optimization is completed.

Returns:

the number of generator runs that can currently be produced, with -1 meaning unlimited generator runs,

index: int = -1¶

is_step_completed(raise_data_required_error: bool = True) → bool[source]¶

Determines if a generation step is completed if the conditions are met.

Conditions for marking the step completed: 1. num_trials in this generation step have been generated (generation

strategy produced that many generator runs, which were then attached to trials),

min_trials_observed in this generation step have been completed,

NOTE: this method raises DataRequiredError if all conditions below are true: 1. raise_data_required_error argument is True, 2. num_trials in current generation step have been generated, 3. min_trials_observed in current generation step have not been completed, 4. enforce_num_trials in current generation step is True.

Parameters:: raise_data_required_error – Whether to raise DataRequiredError in the case detailed above. Not raising the error is useful if just looking to check how many generator runs (to be made into trials) can be produced, but not actually producing them yet.
Returns:: Whether this generation step is completed.

max_parallelism: Optional[int] = None¶

min_trials_observed: int = 0¶

model: Union[ModelRegistryBase, Callable[[...], ModelBridge]]¶

model_gen_kwargs: Optional[Dict[str, Any]] = None¶

model_kwargs: Optional[Dict[str, Any]] = None¶

model_name: str¶

property model_spec: ModelSpec¶: Returns the first model_spec from the model_specs attribute.

property num_can_complete: int¶

Number of trials in generation strategy that can be completed (so are not in status FAILED or ABANDONED). Used to keep track of how many generator runs (that become trials) can be produced from this generation step.

NOTE: This includes COMPLETED trials.

num_remaining_trials_until_max_parallelism(raise_max_parallelism_reached_exception: bool = True) → Optional[int][source]¶

Returns how many generator runs (to be made into a trial each) are left to generate before the max_parallelism limit is reached for this generation step.

Parameters:: raise_max_parallelism_reached_exception – Whether to raise MaxParallelismReachedException if number of trials running in this generation step exceeds maximum parallelism for it.

property num_running_trials: int¶: Number of trials in status RUNNING for this generation step of this strategy.

num_trials: int¶

num_trials_to_gen_and_complete() → Tuple[int, int][source]¶

Returns how many generator runs (to be made into a trial each) are left to generate in this step and how many are left to be completed in it before the generation strategy can move to the next step.

NOTE: returns (-1, -1) if the number of trials to be generated from the given step is unlimited (and therefore it must be the last generation step).

should_deduplicate: bool = False¶

property trial_indices: Dict[int, Set[int]]¶: A mapping from generation step index to the trials of the experiment associated with that GenerationStep. NOTE: This maps all generation steps up to and including the current generation step.

use_update: bool = False¶

Completion Criterion .. automodule:: ax.modelbridge.completion_criterion

members:

undoc-members:

show-inheritance:

Transition Criterion .. automodule:: ax.modelbridge.transition_criterion

members:

undoc-members:

show-inheritance:

Registry¶

Module containing a registry of standard models (and generators, samplers etc.) such as Sobol generator, GP+EI, Thompson sampler, etc.

Use of Models enum allows for serialization and reinstantiation of models and generation strategies from generator runs they produced. To reinstantiate a model from generator run, use get_model_from_generator_run utility from this module.

class ax.modelbridge.registry.ModelRegistryBase(value)[source]¶

Bases: Enum

Base enum that provides instrumentation of __call__ on enum values, for enums that link their values to ModelSetup-s like Models.

property model_bridge_class: Type[ModelBridge]¶: Type of ModelBridge used for the given model+bridge setup.

property model_class: Type[Model]¶: Type of Model used for the given model+bridge setup.

view_defaults() → Tuple[Dict[str, Any], Dict[str, Any]][source]¶

Obtains the default keyword arguments for the model and the modelbridge specified through the Models enum, for ease of use in notebook environment, since models and bridges cannot be inspected directly through the enum.

Returns:: A tuple of default keyword arguments for the model and the model bridge.

view_kwargs() → Tuple[Dict[str, Any], Dict[str, Any]][source]¶

Obtains annotated keyword arguments that the model and the modelbridge (corresponding to a given member of the Models enum) constructors expect.

Returns:: A tuple of annotated keyword arguments for the model and the model bridge.

class ax.modelbridge.registry.ModelSetup(bridge_class: Type[ModelBridge], model_class: Type[Model], transforms: List[Type[Transform]], default_model_kwargs: Optional[Dict[str, Any]] = None, standard_bridge_kwargs: Optional[Dict[str, Any]] = None, not_saved_model_kwargs: Optional[List[str]] = None)[source]¶

Bases: NamedTuple

A model setup defines a coupled combination of a model, a model bridge, standard set of transforms, and standard model bridge keyword arguments. This coupled combination yields a given standard modeling strategy in Ax, such as BoTorch GP+EI, a Thompson sampler, or a Sobol quasirandom generator.

bridge_class: Type[ModelBridge]¶: Alias for field number 0

default_model_kwargs: Optional[Dict[str, Any]]¶: Alias for field number 3

model_class: Type[Model]¶: Alias for field number 1

not_saved_model_kwargs: Optional[List[str]]¶: Alias for field number 5

standard_bridge_kwargs: Optional[Dict[str, Any]]¶: Alias for field number 4

transforms: List[Type[Transform]]¶: Alias for field number 2

class ax.modelbridge.registry.Models(value)[source]¶

Bases: ModelRegistryBase

Registry of available models.

Uses MODEL_KEY_TO_MODEL_SETUP to retrieve settings for model and model bridge, by the key stored in the enum value.

To instantiate a model in this enum, simply call an enum member like so: Models.SOBOL(search_space=search_space) or Models.GPEI(experiment=experiment, data=data). Keyword arguments specified to the call will be passed into the model or the model bridge constructors according to their keyword.

For instance, Models.SOBOL(search_space=search_space, scramble=False) will instantiate a RandomModelBridge(search_space=search_space) with a SobolGenerator(scramble=False) underlying model.

ALEBO = 'ALEBO'¶

ALEBO_INITIALIZER = 'ALEBO_Initializer'¶

class property BOTORCH: Models[source]¶

Registry of available models.

Uses MODEL_KEY_TO_MODEL_SETUP to retrieve settings for model and model bridge, by the key stored in the enum value.

To instantiate a model in this enum, simply call an enum member like so: Models.SOBOL(search_space=search_space) or Models.GPEI(experiment=experiment, data=data). Keyword arguments specified to the call will be passed into the model or the model bridge constructors according to their keyword.

For instance, Models.SOBOL(search_space=search_space, scramble=False) will instantiate a RandomModelBridge(search_space=search_space) with a SobolGenerator(scramble=False) underlying model.

BOTORCH_MODULAR = 'BoTorch'¶

BO_MIXED = 'BO_MIXED'¶

CONTEXT_SACBO = 'Contextual_SACBO'¶

EMPIRICAL_BAYES_THOMPSON = 'EB'¶

FACTORIAL = 'Factorial'¶

FULLYBAYESIAN = 'FullyBayesian'¶

FULLYBAYESIANMOO = 'FullyBayesianMOO'¶

FULLYBAYESIANMOO_MTGP = 'FullyBayesianMOO_MTGP'¶

FULLYBAYESIAN_MTGP = 'FullyBayesian_MTGP'¶

GPEI = 'GPEI'¶

GPKG = 'GPKG'¶

GPMES = 'GPMES'¶

LEGACY_BOTORCH = 'GPEI'¶

MOO = 'MOO'¶

SAASBO = 'SAASBO'¶

SAAS_MTGP = 'SAAS_MTGP'¶

SOBOL = 'Sobol'¶

ST_MTGP = 'ST_MTGP'¶

ST_MTGP_LEGACY = 'ST_MTGP_LEGACY'¶

ST_MTGP_NEHVI = 'ST_MTGP_NEHVI'¶

THOMPSON = 'Thompson'¶

UNIFORM = 'Uniform'¶

ax.modelbridge.registry.get_model_from_generator_run(generator_run: GeneratorRun, experiment: Experiment, data: Data, models_enum: Type[ModelRegistryBase], after_gen: bool = True) → ModelBridge[source]¶

Reinstantiate a model from model key and kwargs stored on a given generator run, with the given experiment and the data to initialize the model with.

Note: requires that the model that was used to get the generator run, is part of the Models registry enum.

Parameters:

generator_run – A GeneratorRun created by the model we are looking to reinstantiate.
experiment – The experiment for which the model is reinstantiated.
data – Data, with which to reinstantiate the model.
models_enum – Subclass of Models registry, from which to obtain the settings of the model. Useful only if the generator run was created via a model that could not be included into the main registry, but can still be represented as a ModelSetup and was added to a registry that extends Models.
after_gen – Whether to reinstantiate the model in the state, in which it was after it created this generator run, as opposed to before. Defaults to True, useful when reinstantiating the model to resume optimization, rather than to recreate its state at the time of generation. TO recreate state at the time of generation, set to False.

Factory¶

ax.modelbridge.factory.DEFAULT_EHVI_BATCH_LIMIT = 5¶

Module containing functions that generate standard models, such as Sobol, GP+EI, etc.

Note: a special case here is a composite generator, which requires an additional GenerationStrategy and is able to delegate work to multiple models (for instance, to a random model to generate the first trial, and to an optimization model for subsequent trials).

ax.modelbridge.factory.get_GPEI(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: device = device(type='cpu')) → TorchModelBridge[source]¶: Instantiates a GP model that generates points with EI.

ax.modelbridge.factory.get_GPKG(experiment: ~ax.core.experiment.Experiment, data: ~ax.core.data.Data, search_space: ~typing.Optional[~ax.core.search_space.SearchSpace] = None, cost_intercept: float = 0.01, dtype: ~torch.dtype = torch.float64, device: ~torch.device = device(type='cpu'), transforms: ~typing.List[~typing.Type[~ax.modelbridge.transforms.base.Transform]] = [<class 'ax.modelbridge.transforms.remove_fixed.RemoveFixed'>, <class 'ax.modelbridge.transforms.choice_encode.OrderedChoiceEncode'>, <class 'ax.modelbridge.transforms.one_hot.OneHot'>, <class 'ax.modelbridge.transforms.int_to_float.IntToFloat'>, <class 'ax.modelbridge.transforms.log.Log'>, <class 'ax.modelbridge.transforms.logit.Logit'>, <class 'ax.modelbridge.transforms.unit_x.UnitX'>, <class 'ax.modelbridge.transforms.ivw.IVW'>, <class 'ax.modelbridge.transforms.derelativize.Derelativize'>, <class 'ax.modelbridge.transforms.standardize_y.StandardizeY'>], transform_configs: ~typing.Optional[~typing.Dict[str, ~typing.Dict[str, ~typing.Optional[~typing.Union[int, float, str, ~botorch.acquisition.acquisition.AcquisitionFunction, ~typing.Dict[int, ~typing.Any], ~typing.Dict[str, ~typing.Any], ~ax.core.optimization_config.OptimizationConfig, ~ax.models.winsorization_config.WinsorizationConfig]]]]] = None, **kwargs: ~typing.Any) → TorchModelBridge[source]¶: Instantiates a GP model that generates points with KG.

ax.modelbridge.factory.get_GPMES(experiment: ~ax.core.experiment.Experiment, data: ~ax.core.data.Data, search_space: ~typing.Optional[~ax.core.search_space.SearchSpace] = None, cost_intercept: float = 0.01, dtype: ~torch.dtype = torch.float64, device: ~torch.device = device(type='cpu'), transforms: ~typing.List[~typing.Type[~ax.modelbridge.transforms.base.Transform]] = [<class 'ax.modelbridge.transforms.remove_fixed.RemoveFixed'>, <class 'ax.modelbridge.transforms.choice_encode.OrderedChoiceEncode'>, <class 'ax.modelbridge.transforms.one_hot.OneHot'>, <class 'ax.modelbridge.transforms.int_to_float.IntToFloat'>, <class 'ax.modelbridge.transforms.log.Log'>, <class 'ax.modelbridge.transforms.logit.Logit'>, <class 'ax.modelbridge.transforms.unit_x.UnitX'>, <class 'ax.modelbridge.transforms.ivw.IVW'>, <class 'ax.modelbridge.transforms.derelativize.Derelativize'>, <class 'ax.modelbridge.transforms.standardize_y.StandardizeY'>], transform_configs: ~typing.Optional[~typing.Dict[str, ~typing.Dict[str, ~typing.Optional[~typing.Union[int, float, str, ~botorch.acquisition.acquisition.AcquisitionFunction, ~typing.Dict[int, ~typing.Any], ~typing.Dict[str, ~typing.Any], ~ax.core.optimization_config.OptimizationConfig, ~ax.models.winsorization_config.WinsorizationConfig]]]]] = None, **kwargs: ~typing.Any) → TorchModelBridge[source]¶: Instantiates a GP model that generates points with MES.

ax.modelbridge.factory.get_MOO_EHVI(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: Optional[device] = None, optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶

Instantiates a multi-objective model that generates points with EHVI.

Requires objective_thresholds, a list of ax.core.ObjectiveThresholds, for every objective being optimized. An arm only improves hypervolume if it is strictly better than all objective thresholds.

objective_thresholds should be included in the optimization_config or experiment.optimization_config.

ax.modelbridge.factory.get_MOO_NEHVI(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: Optional[device] = None, status_quo_features: Optional[ObservationFeatures] = None, use_input_warping: bool = False, optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶: Instantiates a multi-objective model using qNEHVI.

ax.modelbridge.factory.get_MOO_PAREGO(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: device = device(type='cpu'), optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶

Instantiates a multi-objective model that generates points with ParEGO.

qParEGO optimizes random augmented chebyshev scalarizations of the multiple objectives. This allows it to explore non-convex pareto frontiers.

ax.modelbridge.factory.get_MOO_RS(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: device = device(type='cpu'), optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶

Instantiates a Random Scalarization multi-objective model.

Chooses a different random linear scalarization of the objectives for generating each new candidate arm. This will only explore the convex hull of the pareto frontier.

ax.modelbridge.factory.get_MTGP_LEGACY(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, trial_index: Optional[int] = None, device: device = device(type='cpu'), dtype: dtype = torch.float64) → TorchModelBridge[source]¶

Instantiates a Multi-task Gaussian Process (MTGP) model that generates points with EI.

If the input experiment is a MultiTypeExperiment then a Multi-type Multi-task GP model will be instantiated. Otherwise, the model will be a Single-type Multi-task GP.

ax.modelbridge.factory.get_MTGP_NEHVI(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: Optional[device] = None, trial_index: Optional[int] = None, optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶

Instantiates a Multi-task Gaussian Process (MTGP) model that generates points with qNEHVI.

If the input experiment is a MultiTypeExperiment then a Multi-type Multi-task GP model will be instantiated. Otherwise, the model will be a Single-type Multi-task GP.

ax.modelbridge.factory.get_MTGP_PAREGO(experiment: Experiment, data: Data, trial_index: Optional[int] = None, search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: device = device(type='cpu'), optimization_config: Optional[OptimizationConfig] = None) → TorchModelBridge[source]¶

Instantiates a multi-objective, multi-task model that uses qParEGO.

qParEGO optimizes random augmented chebyshev scalarizations of the multiple objectives. This allows it to explore non-convex pareto frontiers.

ax.modelbridge.factory.get_botorch(experiment: ~ax.core.experiment.Experiment, data: ~ax.core.data.Data, search_space: ~typing.Optional[~ax.core.search_space.SearchSpace] = None, dtype: ~torch.dtype = torch.float64, device: ~torch.device = device(type='cpu'), transforms: ~typing.List[~typing.Type[~ax.modelbridge.transforms.base.Transform]] = [<class 'ax.modelbridge.transforms.remove_fixed.RemoveFixed'>, <class 'ax.modelbridge.transforms.choice_encode.OrderedChoiceEncode'>, <class 'ax.modelbridge.transforms.one_hot.OneHot'>, <class 'ax.modelbridge.transforms.int_to_float.IntToFloat'>, <class 'ax.modelbridge.transforms.log.Log'>, <class 'ax.modelbridge.transforms.logit.Logit'>, <class 'ax.modelbridge.transforms.unit_x.UnitX'>, <class 'ax.modelbridge.transforms.ivw.IVW'>, <class 'ax.modelbridge.transforms.derelativize.Derelativize'>, <class 'ax.modelbridge.transforms.standardize_y.StandardizeY'>], transform_configs: ~typing.Optional[~typing.Dict[str, ~typing.Dict[str, ~typing.Optional[~typing.Union[int, float, str, ~botorch.acquisition.acquisition.AcquisitionFunction, ~typing.Dict[int, ~typing.Any], ~typing.Dict[str, ~typing.Any], ~ax.core.optimization_config.OptimizationConfig, ~ax.models.winsorization_config.WinsorizationConfig]]]]] = None, model_constructor: ~typing.Callable[[~typing.List[~torch.Tensor], ~typing.List[~torch.Tensor], ~typing.List[~torch.Tensor], ~typing.List[int], ~typing.List[int], ~typing.List[str], ~typing.Optional[~typing.Dict[str, ~torch.Tensor]], ~typing.Any], ~botorch.models.model.Model] = <function get_and_fit_model>, model_predictor: ~typing.Callable[[~botorch.models.model.Model, ~torch.Tensor], ~typing.Tuple[~torch.Tensor, ~torch.Tensor]] = <function predict_from_model>, acqf_constructor: ~ax.models.torch.botorch_defaults.TAcqfConstructor = <function get_qLogNEI>, acqf_optimizer: ~typing.Callable[[~botorch.acquisition.acquisition.AcquisitionFunction, ~torch.Tensor, int, ~typing.Optional[~typing.List[~typing.Tuple[~torch.Tensor, ~torch.Tensor, float]]], ~typing.Optional[~typing.List[~typing.Tuple[~torch.Tensor, ~torch.Tensor, float]]], ~typing.Optional[~typing.Dict[int, float]], ~typing.Optional[~typing.Callable[[~torch.Tensor], ~torch.Tensor]], ~typing.Any], ~typing.Tuple[~torch.Tensor, ~torch.Tensor]] = <function scipy_optimizer>, refit_on_cv: bool = False, refit_on_update: bool = True, optimization_config: ~typing.Optional[~ax.core.optimization_config.OptimizationConfig] = None) → TorchModelBridge[source]¶: Instantiates a BotorchModel.

ax.modelbridge.factory.get_empirical_bayes_thompson(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, num_samples: int = 10000, min_weight: Optional[float] = None, uniform_weights: bool = False) → DiscreteModelBridge[source]¶: Instantiates an empirical Bayes / Thompson sampling model.

ax.modelbridge.factory.get_factorial(search_space: SearchSpace) → DiscreteModelBridge[source]¶: Instantiates a factorial generator.

ax.modelbridge.factory.get_sobol(search_space: SearchSpace, seed: Optional[int] = None, deduplicate: bool = False, init_position: int = 0, scramble: bool = True, fallback_to_sample_polytope: bool = False) → RandomModelBridge[source]¶

Instantiates a Sobol sequence quasi-random generator.

Parameters:

search_space – Sobol generator search space.
kwargs – Custom args for sobol generator.

Returns:

RandomModelBridge, with SobolGenerator as model.

ax.modelbridge.factory.get_thompson(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, num_samples: int = 10000, min_weight: Optional[float] = None, uniform_weights: bool = False) → DiscreteModelBridge[source]¶: Instantiates a Thompson sampling model.

ax.modelbridge.factory.get_uniform(search_space: SearchSpace, deduplicate: bool = False, seed: Optional[int] = None) → RandomModelBridge[source]¶

Instantiate uniform generator.

Parameters:

search_space – Uniform generator search space.
kwargs – Custom args for uniform generator.

Returns:

RandomModelBridge, with UniformGenerator as model.

ModelSpec¶

class ax.modelbridge.model_spec.FactoryFunctionModelSpec(model_enum: 'Optional[ModelRegistryBase]' = None, model_kwargs: 'Optional[Dict[str, Any]]' = None, model_gen_kwargs: 'Optional[Dict[str, Any]]' = None, model_cv_kwargs: 'Optional[Dict[str, Any]]' = None, _fitted_model: 'Optional[ModelBridge]' = None, _cv_results: 'Optional[List[CVResult]]' = None, _diagnostics: 'Optional[CVDiagnostics]' = None, _last_fit_arg_ids: 'Optional[Dict[str, int]]' = None, factory_function: 'Optional[TModelFactory]' = None)[source]¶

Bases: ModelSpec

factory_function: Optional[Callable[[...], ModelBridge]] = None¶

fit(experiment: Experiment, data: Data, search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, **model_kwargs: Any) → None[source]¶: Fits the specified model on the given experiment + data using the model kwargs set on the model spec, alongside any passed down as kwargs to this function (local kwargs take precedent)

model_enum: Optional[ModelRegistryBase] = None¶

property model_key: str¶: Key string to identify the model used by this ModelSpec.

class ax.modelbridge.model_spec.ModelSpec(model_enum: 'ModelRegistryBase', model_kwargs: 'Optional[Dict[str, Any]]' = None, model_gen_kwargs: 'Optional[Dict[str, Any]]' = None, model_cv_kwargs: 'Optional[Dict[str, Any]]' = None, _fitted_model: 'Optional[ModelBridge]' = None, _cv_results: 'Optional[List[CVResult]]' = None, _diagnostics: 'Optional[CVDiagnostics]' = None, _last_fit_arg_ids: 'Optional[Dict[str, int]]' = None)[source]¶

Bases: SortableBase

copy() → ModelSpec[source]¶: ModelSpec is both a spec and an object that performs actions. Copying is useful to avoid changes to a singleton model spec.

cross_validate() → Tuple[Optional[List[CVResult]], Optional[Dict[str, Dict[str, float]]]][source]¶: Call cross_validate, compute_diagnostics and cache the results If the model cannot be cross validated, warn and return None

property cv_results: Optional[List[CVResult]]¶: Cached CV results from self.cross_validate() if it has been successfully called

property diagnostics: Optional[Dict[str, Dict[str, float]]]¶: Cached CV diagnostics from self.cross_validate() if it has been successfully called

fit(experiment: Experiment, data: Data, **model_kwargs: Any) → None[source]¶: Fits the specified model on the given experiment + data using the model kwargs set on the model spec, alongside any passed down as kwargs to this function (local kwargs take precedent)

property fitted_model: ModelBridge¶: Returns the fitted Ax model, asserting fit() was called

property fixed_features: Optional[ObservationFeatures]¶: Fixed generation features to pass into the Model’s .gen function.

gen(**model_gen_kwargs: Any) → GeneratorRun[source]¶

Generates candidates from the fitted model, using the model gen kwargs set on the model spec, alongside any passed as kwargs to this function (local kwargs take precedent)

NOTE: Model must have been fit prior to calling gen()

Parameters:

n – Integer representing how many arms should be in the generator run produced by this method. NOTE: Some underlying models may ignore the n and produce a model-determined number of arms. In that case this method will also output a generator run with number of arms that can differ from n.
pending_observations – A map from metric name to pending observations for that metric, used by some models to avoid resuggesting points that are currently being evaluated.

model_cv_kwargs: Optional[Dict[str, Any]] = None¶

model_enum: ModelRegistryBase¶

model_gen_kwargs: Optional[Dict[str, Any]] = None¶

property model_key: str¶: Key string to identify the model used by this ModelSpec.

model_kwargs: Optional[Dict[str, Any]] = None¶

class ax.modelbridge.model_spec.ModelSpecJSONEncoder(*, skipkeys=False, ensure_ascii=True, check_circular=True, allow_nan=True, sort_keys=False, indent=None, separators=None, default=None)[source]¶

Bases: JSONEncoder

Generic encoder to avoid JSON errors in ModelSpec.__repr__

default(o: Any) → str[source]¶

Implement this method in a subclass such that it returns a serializable object for o, or calls the base implementation (to raise a TypeError).

For example, to support arbitrary iterators, you could implement default like this:

def default(self, o):
    try:
        iterable = iter(o)
    except TypeError:
        pass
    else:
        return list(iterable)
    # Let the base class default method raise the TypeError
    return JSONEncoder.default(self, o)

Model Bridges¶

Base Model Bridge¶

class ax.modelbridge.base.BaseGenArgs(search_space: ax.core.search_space.SearchSpace, optimization_config: Optional[ax.core.optimization_config.OptimizationConfig], pending_observations: Dict[str, List[ax.core.observation.ObservationFeatures]], fixed_features: Optional[ax.core.observation.ObservationFeatures])[source]¶

Bases: object

fixed_features: Optional[ObservationFeatures]¶

optimization_config: Optional[OptimizationConfig]¶

pending_observations: Dict[str, List[ObservationFeatures]]¶

search_space: SearchSpace¶

class ax.modelbridge.base.GenResults(observation_features: List[ax.core.observation.ObservationFeatures], weights: List[float], best_observation_features: Optional[ax.core.observation.ObservationFeatures] = None, gen_metadata: Dict[str, Any] = <factory>)[source]¶

Bases: object

best_observation_features: Optional[ObservationFeatures] = None¶

gen_metadata: Dict[str, Any]¶

observation_features: List[ObservationFeatures]¶

weights: List[float]¶

class ax.modelbridge.base.ModelBridge(search_space: SearchSpace, model: Any, transforms: Optional[List[Type[Transform]]] = None, experiment: Optional[Experiment] = None, data: Optional[Data] = None, transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_abandoned: bool = False, fit_tracking_metrics: bool = True, fit_on_init: bool = True)[source]¶

Bases: ABC

The main object for using models in Ax.

ModelBridge specifies 3 methods for using models:

predict: Make model predictions. This method is not optimized for speed and so should be used primarily for plotting or similar tasks and not inside an optimization loop.
gen: Use the model to generate new candidates.
cross_validate: Do cross validation to assess model predictions.

ModelBridge converts Ax types like Data and Arm to types that are meant to be consumed by the models. The data sent to the model will depend on the implementation of the subclass, which will specify the actual API for external model.

This class also applies a sequence of transforms to the input data and problem specification which can be used to ensure that the external model receives appropriate inputs.

Subclasses will implement what is here referred to as the “terminal transform,” which is a transform that changes types of the data and problem specification.

compute_model_fit_metrics(experiment: Experiment, fit_metrics_dict: Optional[Dict[str, ModelFitMetricProtocol]] = None) → Dict[str, Dict[str, float]][source]¶

Computes the model fit metrics from the scheduler state.

Parameters:

experiment – The experiment with whose data to compute the model fit metrics.
fit_metrics_dict – An optional dictionary with model fit metric functions,
ModelFitMetricProtocol (i.e. a) –
keys. (as values and their names as) –

Returns:

A nested dictionary mapping from the model fit metric names and the experimental metric names to the values of the model fit metrics.

Example for an imaginary AutoML experiment that seeks to minimize the test error after training an expensive model, with respect to hyper-parameters:

``` model_fit_dict = model_fit_metrics_from_scheduler(scheduler) model_fit_dict[“coefficient_of_determination”][“test error”] =

coefficient of determination of the test error predictions

```

cross_validate(cv_training_data: List[Observation], cv_test_points: List[ObservationFeatures]) → List[ObservationData][source]¶

Make a set of cross-validation predictions.

Parameters:

cv_training_data – The training data to use for cross validation.
cv_test_points – The test points at which predictions will be made.

Returns:

A list of predictions at the test points.

feature_importances(metric_name: str) → Dict[str, float][source]¶

Computes feature importances for a single metric.

Depending on the type of the model, this method will approach sensitivity analysis (calculating the sensitivity of the metric to changes in the search space’s parameters, a.k.a. features) differently.

For Bayesian optimization models (BoTorch models), this method uses parameter inverse lengthscales to compute normalized feature importances.

NOTE: Currently, this is only implemented for GP models.

Parameters:: metric_name – Name of metric to compute feature importances for.
Returns:: A dictionary mapping parameter names to their corresponding feature importances.

gen(n: int, search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, fixed_features: Optional[ObservationFeatures] = None, model_gen_options: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None) → GeneratorRun[source]¶

Generate new points from the underlying model according to search_space, optimization_config and other parameters.

Parameters:

n – Number of points to generate
search_space – Search space
optimization_config – Optimization config
pending_observations – A map from metric name to pending observations for that metric.
fixed_features – An ObservationFeatures object containing any features that should be fixed at specified values during generation.
model_gen_options – A config dictionary that is passed along to the model. See TorchOptConfig for details.

Returns:

A GeneratorRun object that contains the generated points and other metadata.

get_training_data() → List[Observation][source]¶: A copy of the (untransformed) data with which the model was fit.

property metric_names: Set[str]¶: Metric names present in training data.

property model_space: SearchSpace¶: SearchSpace used to fit model.

predict(observation_features: List[ObservationFeatures]) → Tuple[Dict[str, List[float]], Dict[str, Dict[str, List[float]]]][source]¶

Make model predictions (mean and covariance) for the given observation features.

Predictions are made for all outcomes. If an out-of-design observation can successfully be transformed, the predicted value will be returned. Othwerise, we will attempt to find that observation in the training data and return the raw value.

Parameters:

observation_features – observation features

Returns:

2-element tuple containing

Dictionary from metric name to list of mean estimates, in same order as observation_features.
Nested dictionary with cov[‘metric1’][‘metric2’] a list of cov(metric1@x, metric2@x) for x in observation_features.

property status_quo: Optional[Observation]¶: Observation corresponding to status quo, if any.

property status_quo_data_by_trial: Optional[Dict[int, ObservationData]]¶: A map of trial index to the status quo observation data of each trial

property training_in_design: List[bool]¶: For each observation in the training data, a bool indicating if it is in-design for the model.

transform_observation_features(observation_features: List[ObservationFeatures]) → Any[source]¶

Applies transforms to given observation features and returns them in the model space.

Parameters:: observation_features – ObservationFeatures to be transformed.
Returns:: Transformed values. This could be e.g. a torch Tensor, depending on the ModelBridge subclass.

transform_observations(observations: List[Observation]) → Any[source]¶

Applies transforms to given observation features and returns them in the model space.

Parameters:: observation_features – ObservationFeatures to be transformed.
Returns:: Transformed values. This could be e.g. a torch Tensor, depending on the ModelBridge subclass.

update(new_data: Data, experiment: Experiment) → None[source]¶

Update the model bridge and the underlying model with new data. This method should be used instead of fit, in cases where the underlying model does not need to be re-fit from scratch, but rather updated.

Note: update expects only new data (obtained since the model initialization or last update) to be passed in, not all data in the experiment.

Parameters:

new_data – Data from the experiment obtained since the last call to update.
experiment – Experiment, in which this data was obtained.

ax.modelbridge.base.clamp_observation_features(observation_features: List[ObservationFeatures], search_space: SearchSpace) → List[ObservationFeatures][source]¶

ax.modelbridge.base.gen_arms(observation_features: List[ObservationFeatures], arms_by_signature: Optional[Dict[str, Arm]] = None) → Tuple[List[Arm], Optional[Dict[str, Optional[Dict[str, Any]]]]][source]¶: Converts observation features to a tuple of arms list and candidate metadata dict, where arm signatures are mapped to their respective candidate metadata.

ax.modelbridge.base.unwrap_observation_data(observation_data: List[ObservationData]) → Tuple[Dict[str, List[float]], Dict[str, Dict[str, List[float]]]][source]¶: Converts observation data to the format for model prediction outputs. That format assumes each observation data has the same set of metrics.

Discrete Model Bridge¶

class ax.modelbridge.discrete.DiscreteModelBridge(search_space: SearchSpace, model: Any, transforms: Optional[List[Type[Transform]]] = None, experiment: Optional[Experiment] = None, data: Optional[Data] = None, transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_abandoned: bool = False, fit_tracking_metrics: bool = True, fit_on_init: bool = True)[source]¶

Bases: ModelBridge

A model bridge for using models based on discrete parameters.

Requires that all parameters have been transformed to ChoiceParameters.

model: DiscreteModel¶

outcomes: List[str]¶

parameters: List[str]¶

search_space: Optional[SearchSpace]¶

Random Model Bridge¶

class ax.modelbridge.random.RandomModelBridge(search_space: SearchSpace, model: Any, transforms: Optional[List[Type[Transform]]] = None, experiment: Optional[Experiment] = None, data: Optional[Data] = None, transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_abandoned: bool = False, fit_tracking_metrics: bool = True, fit_on_init: bool = True)[source]

Bases: ModelBridge

A model bridge for using purely random ‘models’. Data and optimization configs are not required.

This model bridge interfaces with RandomModel.

model

A RandomModel used to generate candidates (note: this an awkward use of the word ‘model’).

Type:: ax.models.random.base.RandomModel

parameters

Params found in search space on modelbridge init.

Type:: List[str]

model: RandomModel

parameters: List[str]

Torch Model Bridge¶

class ax.modelbridge.torch.TorchModelBridge(experiment: Experiment, search_space: SearchSpace, data: Data, model: TorchModel, transforms: List[Type[Transform]], transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, torch_dtype: Optional[dtype] = None, torch_device: Optional[device] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_abandoned: bool = False, fit_tracking_metrics: bool = True, fit_on_init: bool = True, default_model_gen_options: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: ModelBridge

A model bridge for using torch-based models.

Specifies an interface that is implemented by TorchModel. In particular, model should have methods fit, predict, and gen. See TorchModel for the API for each of these methods.

Requires that all parameters have been transformed to RangeParameters or FixedParameters with float type and no log scale.

This class converts Ax parameter types to torch tensors before passing them to the model.

evaluate_acquisition_function(observation_features: Union[List[ObservationFeatures], List[List[ObservationFeatures]]], search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, fixed_features: Optional[ObservationFeatures] = None, acq_options: Optional[Dict[str, Any]] = None) → List[float][source]¶

Evaluate the acquisition function for given set of observation features.

Parameters:

observation_features – Either a list or a list of lists of observation features, representing parameterizations, for which to evaluate the acquisition function. If a single list is passed, the acquisition function is evaluated for each observation feature. If a list of lists is passed each element (itself a list of observation features) represents a batch of points for which to evaluate the joint acquisition value.
search_space – Search space for fitting the model.
optimization_config – Optimization config defining how to optimize the model.
pending_observations – A map from metric name to pending observations for that metric.
fixed_features – An ObservationFeatures object containing any features that should be fixed at specified values during generation.
acq_options – Keyword arguments used to contruct the acquisition function.

Returns:

A list of acquisition function values, in the same order as the input observation features.

feature_importances(metric_name: str) → Dict[str, float][source]¶

Computes feature importances for a single metric.

Depending on the type of the model, this method will approach sensitivity analysis (calculating the sensitivity of the metric to changes in the search space’s parameters, a.k.a. features) differently.

For Bayesian optimization models (BoTorch models), this method uses parameter inverse lengthscales to compute normalized feature importances.

NOTE: Currently, this is only implemented for GP models.

Parameters:: metric_name – Name of metric to compute feature importances for.
Returns:: A dictionary mapping parameter names to their corresponding feature importances.

infer_objective_thresholds(search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, fixed_features: Optional[ObservationFeatures] = None) → List[ObjectiveThreshold][source]¶

Infer objective thresholds.

This method is only applicable for Multi-Objective optimization problems.

This method uses the model-estimated Pareto frontier over the in-sample points to infer absolute (not relativized) objective thresholds.

This uses a heuristic that sets the objective threshold to be a scaled nadir point, where the nadir point is scaled back based on the range of each objective across the current in-sample Pareto frontier.

model: Optional[TorchModel] = None¶

model_best_point(search_space: Optional[SearchSpace] = None, optimization_config: Optional[OptimizationConfig] = None, pending_observations: Optional[Dict[str, List[ObservationFeatures]]] = None, fixed_features: Optional[ObservationFeatures] = None, model_gen_options: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None) → Optional[Tuple[Arm, Optional[Tuple[Dict[str, float], Optional[Dict[str, Dict[str, float]]]]]]][source]¶

outcomes: List[str]¶

parameters: List[str]¶

ax.modelbridge.torch.validate_optimization_config(optimization_config: OptimizationConfig, outcomes: List[str]) → None[source]¶

Validate optimization config against model fitted outcomes.

Parameters:

optimization_config – Config to validate.
outcomes – List of metric names w/ valid model fits.

Raises:

ValueError if –

Relative constraints are found 2. Optimization metrics are not present in model fitted outcomes.

Pairwise Model Bridge¶

class ax.modelbridge.pairwise.PairwiseModelBridge(experiment: Experiment, search_space: SearchSpace, data: Data, model: TorchModel, transforms: List[Type[Transform]], transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, torch_dtype: Optional[dtype] = None, torch_device: Optional[device] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_abandoned: bool = False, fit_tracking_metrics: bool = True, fit_on_init: bool = True, default_model_gen_options: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: TorchModelBridge

dtype: torch.dtype¶

fit_time: float¶

fit_time_since_gen: float¶

is_moo_problem: bool¶

outcomes: List[str]¶

parameters: List[str]¶

transforms: MutableMapping[str, Transform]¶

Map Torch Model Bridge¶

class ax.modelbridge.map_torch.MapTorchModelBridge(experiment: Experiment, search_space: SearchSpace, data: Data, model: TorchModel, transforms: List[Type[Transform]], transform_configs: Optional[Dict[str, Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]]] = None, torch_dtype: Optional[dtype] = None, torch_device: Optional[device] = None, status_quo_name: Optional[str] = None, status_quo_features: Optional[ObservationFeatures] = None, optimization_config: Optional[OptimizationConfig] = None, fit_out_of_design: bool = False, fit_on_init: bool = True, default_model_gen_options: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None, map_data_limit_rows_per_metric: Optional[int] = None, map_data_limit_rows_per_group: Optional[int] = None)[source]¶

Bases: TorchModelBridge

A model bridge for using torch-based models that fit on MapData. Most of the TorchModelBridge functionality is retained, except that this class should be used in the case where model makes use of map_key values. For example, the use case of fitting a joint surrogate model on (parameters, map_key), while candidate generation is only for parameters.

dtype: torch.dtype¶

fit_time: float¶

fit_time_since_gen: float¶

is_moo_problem: bool¶

outcomes: List[str]¶

parameters: List[str]¶

property parameters_with_map_keys: List[str]¶

transforms: MutableMapping[str, Transform]¶

Utilities¶

General Utilities¶

ax.modelbridge.modelbridge_utils.array_to_observation_data(f: ndarray, cov: ndarray, outcomes: List[str]) → List[ObservationData][source]¶

Convert arrays of model predictions to a list of ObservationData.

Parameters:

f – An (n x m) array
cov – An (n x m x m) array
outcomes – A list of d outcome names

Returns: A list of n ObservationData

ax.modelbridge.modelbridge_utils.check_has_multi_objective_and_data(experiment: Experiment, data: Data, optimization_config: Optional[OptimizationConfig] = None) → None[source]¶: Raise an error if not using a MultiObjective or if the data is empty.

ax.modelbridge.modelbridge_utils.extract_objective_thresholds(objective_thresholds: List[ObjectiveThreshold], objective: Objective, outcomes: List[str]) → Optional[ndarray][source]¶

Extracts objective thresholds’ values, in the order of outcomes.

Will return None if no objective thresholds, otherwise the extracted tensor will be the same length as outcomes.

Outcomes that are not part of an objective and the objectives that do no have a corresponding objective threshold will be given a threshold of NaN. We will later infer appropriate threshold values for the objectives that are given a threshold of NaN.

Parameters:

objective_thresholds – Objective thresholds to extract values from.
objective – The corresponding Objective, for validation purposes.
outcomes – n-length list of names of metrics.

Returns:

(n,) array of thresholds

ax.modelbridge.modelbridge_utils.extract_objective_weights(objective: Objective, outcomes: List[str]) → ndarray[source]¶

Extract a weights for objectives.

Weights are for a maximization problem.

Give an objective weight to each modeled outcome. Outcomes that are modeled but not part of the objective get weight 0.

In the single metric case, the objective is given either +/- 1, depending on the minimize flag.

In the multiple metric case, each objective is given the input weight, multiplied by the minimize flag.

Parameters:

objective – Objective to extract weights from.
outcomes – n-length list of names of metrics.

Returns:

n-length array of weights.

ax.modelbridge.modelbridge_utils.extract_outcome_constraints(outcome_constraints: List[OutcomeConstraint], outcomes: List[str]) → Optional[Tuple[ndarray, ndarray]][source]¶

ax.modelbridge.modelbridge_utils.extract_parameter_constraints(parameter_constraints: List[ParameterConstraint], param_names: List[str]) → Optional[Tuple[ndarray, ndarray]][source]¶: Extract parameter constraints.

ax.modelbridge.modelbridge_utils.extract_risk_measure(risk_measure: RiskMeasure) → RiskMeasureMCObjective[source]¶

Extracts the BoTorch risk measure objective from an Ax RiskMeasure.

Parameters:: risk_measure – The RiskMeasure object.
Returns:: The corresponding RiskMeasureMCObjective object.

ax.modelbridge.modelbridge_utils.extract_robust_digest(search_space: SearchSpace, param_names: List[str]) → Optional[RobustSearchSpaceDigest][source]¶

Extracts the RobustSearchSpaceDigest.

Parameters:

search_space – A SearchSpace to digest.
param_names – A list of names of the parameters that are used in optimization. If environmental variables are present, these should be the last entries in param_names.

Returns:

If the search_space is not a RobustSearchSpace, this returns None. Otherwise, it returns a RobustSearchSpaceDigest with entries populated from the properties of the search_space. In particular, this constructs two optional callables, sample_param_perturbations and sample_environmental, that require no inputs and return a num_samples x d-dim array of samples from the corresponding parameter distributions, where d is the number of environmental variables for environmental_sampler and the number of non-environmental parameters in `param_names for distribution_sampler.

ax.modelbridge.modelbridge_utils.extract_search_space_digest(search_space: SearchSpace, param_names: List[str]) → SearchSpaceDigest[source]¶

Extract basic parameter properties from a search space.

This is typically called with the transformed search space and makes certain assumptions regarding the parameters being transformed.

For ChoiceParameters: * The choices are assumed to be numerical. ChoiceEncode and OrderedChoiceEncode transforms handle this. * If is_task, its index is added to task_features. * If ordered, its index is added to ordinal_features. * Otherwise, its index is added to categorical_features. * In all cases, the choices are added to discrete_choices. * The minimum and maximum value are added to the bounds. * The target_value is added to target_values.

For RangeParameters: * They’re assumed not to be in the log_scale. The Log transform handles this. * If integer, its index is added to ordinal_features and the choices are added to discrete_choices. * The minimum and maximum value are added to the bounds.

If a parameter is_fidelity: * Its target_value is assumed to be numerical. * The target_value is added to target_values. * Its index is added to fidelity_features.

ax.modelbridge.modelbridge_utils.feasible_hypervolume(optimization_config: MultiObjectiveOptimizationConfig, values: Dict[str, ndarray]) → ndarray[source]¶

Compute the feasible hypervolume each iteration.

Parameters:

optimization_config – Optimization config.
values – Dictionary from metric name to array of value at each iteration (each array is n-dim). If optimization config contains outcome constraints, values for them must be present in values.

Returns: Array of feasible hypervolumes.

ax.modelbridge.modelbridge_utils.get_fixed_features(fixed_features: Optional[ObservationFeatures], param_names: List[str]) → Optional[Dict[int, float]][source]¶: Reformat a set of fixed_features.

ax.modelbridge.modelbridge_utils.get_pareto_frontier_and_configs(modelbridge: modelbridge_module.torch.TorchModelBridge, observation_features: List[ObservationFeatures], observation_data: Optional[List[ObservationData]] = None, objective_thresholds: Optional[TRefPoint] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None, arm_names: Optional[List[Optional[str]]] = None, use_model_predictions: bool = True, transform_outcomes_and_configs: Optional[bool] = None) → Tuple[List[Observation], Tensor, Tensor, Optional[Tensor]][source]¶

Helper that applies transforms and calls frontier_evaluator.

Returns the frontier_evaluator configs in addition to the Pareto observations.

Parameters:

modelbridge – Modelbridge used to predict metrics outcomes.
observation_features – Observation features to consider for the Pareto frontier.
observation_data – Data for computing the Pareto front, unless observation_features are provided and model_predictions is True.
objective_thresholds – Metric values bounding the region of interest in the objective outcome space; used to override objective thresholds specified in optimization_config, if necessary.
optimization_config – Multi-objective optimization config.
arm_names – Arm names for each observation in observation_features.
use_model_predictions – If True, will use model predictions at observation_features to compute Pareto front. If False, will use observation_data directly to compute Pareto front, ignoring observation_features.
transform_outcomes_and_configs – Deprecated and must be False if provided. Previously, if True, would transform the optimization config, observation features and observation data, before calling frontier_evaluator, then will untransform all of the above before returning the observations.

Returns: Four-item tuple of:

frontier_observations: Observations of points on the pareto frontier,
f: n x m tensor representation of the Pareto frontier values where n is the length of frontier_observations and m is the number of metrics,
obj_w: m tensor of objective weights,
obj_t: m tensor of objective thresholds corresponding to Y, or None if no objective thresholds used.

ax.modelbridge.modelbridge_utils.hypervolume(modelbridge: modelbridge_module.torch.TorchModelBridge, observation_features: List[ObservationFeatures], objective_thresholds: Optional[TRefPoint] = None, observation_data: Optional[List[ObservationData]] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None, selected_metrics: Optional[List[str]] = None, use_model_predictions: bool = True) → float[source]¶

Helper function that computes (feasible) hypervolume.

Parameters:

modelbridge – The modelbridge.
observation_features – The observation features for the in-sample arms.
objective_thresholds – The objective thresholds to be used for computing the hypervolume. If None, these are extracted from the optimization config.
observation_data – The observed outcomes for the in-sample arms.
optimization_config – The optimization config specifying the objectives, objectives thresholds, and outcome constraints.
selected_metrics – A list of objective metric names specifying which objectives to use in hypervolume computation. By default, all objectives are used.
use_model_predictions – A boolean indicating whether to use model predictions for determining the in-sample Pareto frontier instead of the raw observed values.

Returns:

The (feasible) hypervolume.

ax.modelbridge.modelbridge_utils.observation_data_to_array(outcomes: List[str], observation_data: List[ObservationData]) → Tuple[ndarray, ndarray][source]¶

Convert a list of Observation data to arrays.

Parameters:

observation_data – A list of n ObservationData

Returns:

An array of n ObservationData, each containing

f: An (n x m) array
cov: An (n x m x m) array

ax.modelbridge.modelbridge_utils.observation_features_to_array(parameters: List[str], obsf: List[ObservationFeatures]) → ndarray[source]¶: Convert a list of Observation features to arrays.

ax.modelbridge.modelbridge_utils.observed_hypervolume(modelbridge: modelbridge_module.torch.TorchModelBridge, objective_thresholds: Optional[TRefPoint] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None, selected_metrics: Optional[List[str]] = None) → float[source]¶

Calculate hypervolume of a pareto frontier based on observed data.

Given observed data, return the hypervolume of the pareto frontier formed from those outcomes.

Parameters:

modelbridge – Modelbridge that holds previous training data.
objective_thresholds – Point defining the origin of hyperrectangles that can contribute to hypervolume. Note that if this is None, objective_thresholds must be present on the modelbridge.optimization_config.
observation_features – observation features to predict. Model’s training data used by default if unspecified.
optimization_config – Optimization config
selected_metrics – If specified, hypervolume will only be evaluated on the specified subset of metrics. Otherwise, all metrics will be used.

Returns:

(float) calculated hypervolume.

ax.modelbridge.modelbridge_utils.observed_pareto_frontier(modelbridge: modelbridge_module.torch.TorchModelBridge, objective_thresholds: Optional[TRefPoint] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None) → List[Observation][source]¶

Generate a pareto frontier based on observed data. Given observed data (sourced from model training data), return points on the Pareto frontier as Observation-s.

Parameters:

modelbridge – Modelbridge that holds previous training data.
objective_thresholds – Metric values bounding the region of interest in the objective outcome space; used to override objective thresholds in the optimization config, if needed.
optimization_config – Multi-objective optimization config.

Returns:

Data representing points on the pareto frontier.

ax.modelbridge.modelbridge_utils.pareto_frontier(modelbridge: modelbridge_module.torch.TorchModelBridge, observation_features: List[ObservationFeatures], observation_data: Optional[List[ObservationData]] = None, objective_thresholds: Optional[TRefPoint] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None, arm_names: Optional[List[Optional[str]]] = None, use_model_predictions: bool = True) → List[Observation][source]¶

Compute the list of points on the Pareto frontier as Observation-s in the untransformed search space.

Parameters:

modelbridge – Modelbridge used to predict metrics outcomes.
observation_features – Observation features to consider for the Pareto frontier.
observation_data – Data for computing the Pareto front, unless observation_features are provided and model_predictions is True.
objective_thresholds – Metric values bounding the region of interest in the objective outcome space; used to override objective thresholds specified in optimization_config, if necessary.
optimization_config – Multi-objective optimization config.
arm_names – Arm names for each observation in observation_features.
use_model_predictions – If True, will use model predictions at observation_features to compute Pareto front. If False, will use observation_data directly to compute Pareto front, ignoring observation_features.

Returns: Points on the Pareto frontier as Observation-s in order of descending: individual hypervolume if possible.

ax.modelbridge.modelbridge_utils.parse_observation_features(X: ndarray, param_names: List[str], candidate_metadata: Optional[List[Optional[Dict[str, Any]]]] = None) → List[ObservationFeatures][source]¶

Re-format raw model-generated candidates into ObservationFeatures.

Parameters:

param_names – List of param names.
X – Raw np.ndarray of candidate values.
candidate_metadata – Model’s metadata for candidates it produced.

Returns:

List of candidates, represented as ObservationFeatures.

ax.modelbridge.modelbridge_utils.pending_observations_as_array_list(pending_observations: Dict[str, List[ObservationFeatures]], outcome_names: List[str], param_names: List[str]) → Optional[List[ndarray]][source]¶

Re-format pending observations.

Parameters:

pending_observations – List of raw numpy pending observations.
outcome_names – List of outcome names.
param_names – List fitted param names.

Returns:

Filtered pending observations data, by outcome and param names.

ax.modelbridge.modelbridge_utils.predicted_hypervolume(modelbridge: modelbridge_module.torch.TorchModelBridge, objective_thresholds: Optional[TRefPoint] = None, observation_features: Optional[List[ObservationFeatures]] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None, selected_metrics: Optional[List[str]] = None) → float[source]¶

Calculate hypervolume of a pareto frontier based on the posterior means of given observation features.

Given a model and features to evaluate calculate the hypervolume of the pareto frontier formed from their predicted outcomes.

Parameters:

modelbridge – Modelbridge used to predict metrics outcomes.
objective_thresholds – point defining the origin of hyperrectangles that can contribute to hypervolume.
observation_features – observation features to predict. Model’s training data used by default if unspecified.
optimization_config – Optimization config
selected_metrics – If specified, hypervolume will only be evaluated on the specified subset of metrics. Otherwise, all metrics will be used.

Returns:

calculated hypervolume.

ax.modelbridge.modelbridge_utils.predicted_pareto_frontier(modelbridge: modelbridge_module.torch.TorchModelBridge, objective_thresholds: Optional[TRefPoint] = None, observation_features: Optional[List[ObservationFeatures]] = None, optimization_config: Optional[MultiObjectiveOptimizationConfig] = None) → List[Observation][source]¶

Generate a Pareto frontier based on the posterior means of given observation features. Given a model and optionally features to evaluate (will use model training data if not specified), use the model to predict which points lie on the Pareto frontier.

Parameters:

modelbridge – Modelbridge used to predict metrics outcomes.
observation_features – Observation features to predict, if provided and use_model_predictions is True.
objective_thresholds – Metric values bounding the region of interest in the objective outcome space; used to override objective thresholds specified in optimization_config, if necessary.
optimization_config – Multi-objective optimization config.

Returns:

Observations representing points on the Pareto frontier.

ax.modelbridge.modelbridge_utils.process_contextual_datasets(datasets: List[SupervisedDataset], outcomes: List[str], parameter_decomposition: Dict[str, List[str]], metric_decomposition: Optional[Dict[str, List[str]]] = None) → List[ContextualDataset][source]¶

Contruct a list of ContextualDataset.

Parameters:

datasets – A list of Dataset objects.
outcomes – The names of the outcomes to extract observations for.
parameter_decomposition – Keys are context names. Values are the lists of parameter names belonging to the context, e.g. {‘context1’: [‘p1_c1’, ‘p2_c1’],’context2’: [‘p1_c2’, ‘p2_c2’]}.
metric_decomposition –
Context breakdown metrics. Keys are context names. Values are the lists of metric names belonging to the context: {

’context1’: [‘m1_c1’, ‘m2_c1’, ‘m3_c1’], ‘context2’: [‘m1_c2’, ‘m2_c2’, ‘m3_c2’],

}

Returns: A list of ContextualDataset objects.

If datasets contain overall outcome only, each element in the list can

correspond and the list is sorted based on the outcomes. - If datasets contains a mixed of context-level and overall outcomes, each element may contain multiple outcomes; and the ordering of predicted output will be handled by the downstream

ax.modelbridge.modelbridge_utils.transform_callback(param_names: List[str], transforms: MutableMapping[str, Transform]) → Callable[[ndarray], ndarray][source]¶

A closure for performing the round trip transformations.

The function round points by de-transforming points back into the original space (done by applying transforms in reverse), and then re-transforming them. This function is specifically for points which are formatted as numpy arrays. This function is passed to _model_gen.

Parameters:

param_names – Names of parameters to transform.
transforms – Ordered set of transforms which were applied to the points.

Returns:

a function with for performing the roundtrip transform.

ax.modelbridge.modelbridge_utils.transform_search_space(search_space: SearchSpace, transforms: Iterable[Type[Transform]], transform_configs: Mapping[str, Any]) → SearchSpace[source]¶: Apply all given transforms to a copy of the SearchSpace iteratively.

ax.modelbridge.modelbridge_utils.validate_and_apply_final_transform(objective_weights: ~numpy.ndarray, outcome_constraints: ~typing.Optional[~typing.Tuple[~numpy.ndarray, ~numpy.ndarray]], linear_constraints: ~typing.Optional[~typing.Tuple[~numpy.ndarray, ~numpy.ndarray]], pending_observations: ~typing.Optional[~typing.List[~numpy.ndarray]], objective_thresholds: ~typing.Optional[~numpy.ndarray] = None, final_transform: ~typing.Callable[[~numpy.ndarray], ~torch.Tensor] = <built-in method tensor of type object>) → Tuple[Tensor, Optional[Tuple[Tensor, Tensor]], Optional[Tuple[Tensor, Tensor]], Optional[List[Tensor]], Optional[Tensor]][source]¶

Prediction Utilities¶

ax.modelbridge.prediction_utils.predict_at_point(model: ModelBridge, obsf: ObservationFeatures, metric_names: Set[str], scalarized_metric_config: Optional[List[Dict[str, Any]]] = None) → Tuple[Dict[str, float], Dict[str, float]][source]¶

Make a prediction at a point.

Returns mean and standard deviation in format expected by plotting.

Parameters:

model – ModelBridge
obsf – ObservationFeatures for which to predict
metric_names – Limit predictions to these metrics.
scalarized_metric_config – An optional list of dicts specifying how to aggregate multiple metrics into a single scalarized metric. For each dict, the key is the name of the new scalarized metric, and the value is a dictionary mapping each metric to its weight. e.g. {“name”: “metric1:agg”, “weight”: {“metric1_c1”: 0.5, “metric1_c2”: 0.5}}.

Returns:

A tuple containing

Map from metric name to prediction.
Map from metric name to standard error.

ax.modelbridge.prediction_utils.predict_by_features(model: ModelBridge, label_to_feature_dict: Dict[int, ObservationFeatures], metric_names: Set[str]) → Dict[int, Dict[str, Tuple[float, float]]][source]¶

Predict for given data points and model.

Parameters:

model – Model to be used for the prediction
metric_names – Names of the metrics, for which to retrieve predictions.
label_to_feature_dict – Mapping from an int label to a Parameterization. These data points are predicted.

Returns:

A mapping from an int label to a mapping of metric names to tuples of predicted metric mean and SEM, of form: { trial_index -> { metric_name: ( mean, SEM ) } }.

Cross Validation¶

class ax.modelbridge.cross_validation.AssessModelFitResult(good_fit_metrics_to_fisher_score: Dict[str, float], bad_fit_metrics_to_fisher_score: Dict[str, float])[source]¶

Bases: NamedTuple

Container for model fit assessment results

bad_fit_metrics_to_fisher_score: Dict[str, float]¶: Alias for field number 1

good_fit_metrics_to_fisher_score: Dict[str, float]¶: Alias for field number 0

class ax.modelbridge.cross_validation.BestModelSelector[source]¶

Bases: ABC

abstract best_diagnostic(diagnostics: List[Dict[str, Dict[str, float]]]) → int[source]¶: Return the index of the best diagnostic.

class ax.modelbridge.cross_validation.CVResult(observed: Observation, predicted: ObservationData)[source]¶

Bases: NamedTuple

Container for cross validation results.

observed: Observation¶: Alias for field number 0

predicted: ObservationData¶: Alias for field number 1

class ax.modelbridge.cross_validation.CallableEnum(value)[source]¶

Bases: Enum

An enumeration.

class ax.modelbridge.cross_validation.DiagnosticCriterion(value)[source]¶

Bases: CallableEnum

An enumeration.

MIN: Callable[[Iterable[Number]], Number] = functools.partial(<function amin>)¶

class ax.modelbridge.cross_validation.MetricAggregation(value)[source]¶

Bases: CallableEnum

An enumeration.

MEAN: Callable[[Iterable[Number]], Number] = functools.partial(<function mean>)¶

class ax.modelbridge.cross_validation.SingleDiagnosticBestModelSelector(diagnostic: str, metric_aggregation: MetricAggregation, criterion: DiagnosticCriterion)[source]¶

Bases: BestModelSelector

Choose the best model using a single cross-validation diagnostic.

The input is a list of CVDiagnostics, each corresponding to one model. The specified diagnostic is extracted from each of the CVDiagnostics, its values (each of which corresponds to a separate metric) are aggregated with the aggregation function, the best one is determined with the criterion, and the index of the best diagnostic result is returned.

Example:

::

s = SingleDiagnosticBestModelSelector(
diagnostic = ‘Fisher exact test p’, criterion = DiagnosticCriterion.MIN, metric_aggregation = MetricAggregation.MEAN,

) best_diagnostic_index = s.best_diagnostic(diagnostics)

Parameters:

diagnostic (str) – The name of the diagnostic to use, which should be a key in CVDiagnostic.
metric_aggregation (MetricAggregation) – Callable applied to the values of the diagnostic for a single model to produce a single number.
criterion – Callable used to determine which of the (aggregated) diagnostics is the best.

best_diagnostic(diagnostics: List[Dict[str, Dict[str, float]]]) → int[source]¶: Return the index of the best diagnostic.

ax.modelbridge.cross_validation.assess_model_fit(diagnostics: Dict[str, Dict[str, float]], significance_level: float = 0.1) → AssessModelFitResult[source]¶

Assess model fit for given diagnostics results.

It determines if a model fit is good or bad based on Fisher exact test p

Parameters:: diagnostics – Output of compute_diagnostics
Returns:: Two dictionaries, one for good metrics, one for bad metrics, each mapping metric name to p-value

ax.modelbridge.cross_validation.compute_diagnostics(result: List[CVResult]) → Dict[str, Dict[str, float]][source]¶

Computes diagnostics for given cross validation results.

It provides a dictionary with values for the following diagnostics, for each metric:

‘Mean prediction CI’: the average width of the CIs at each of the CV predictions, relative to the observed mean.
‘MAPE’: mean absolute percentage error of the estimated mean relative to the observed mean.
‘wMAPE’: Weighted mean absolute percentage error.
‘Total raw effect’: the multiple change from the smallest observed mean to the largest observed mean, i.e. (max - min) / min.
‘Correlation coefficient’: the Pearson correlation of the estimated and observed means.
‘Rank correlation’: the Spearman correlation of the estimated and observed means.
‘Fisher exact test p’: we test if the model is able to distinguish the bottom half of the observations from the top half, using Fisher’s exact test and the observed/estimated means. A low p value indicates that the model has some ability to identify good arms. A high p value indicates that the model cannot identify arms better than chance, or that the observations are too noisy to be able to tell.

Each of these is returned as a dictionary from metric name to value for that metric.

Parameters:: result – Output of cross_validate
Returns:: A dictionary keyed by diagnostic name with results as described above.

ax.modelbridge.cross_validation.cross_validate(model: ModelBridge, folds: int = -1, test_selector: Optional[Callable] = None) → List[CVResult][source]¶

Cross validation for model predictions.

Splits the model’s training data into train/test folds and makes out-of-sample predictions on the test folds.

Train/test splits are made based on arm names, so that repeated observations of a arm will always be in the train or test set together.

The test set can be limited to a specific set of observations by passing in a test_selector callable. This function should take in an Observation and return a boolean indiciating if it should be used in the test set or not. For example, we can limit the test set to arms with trial 0 with test_selector = lambda obs: obs.features.trial_index == 0 If not provided, all observations will be available for the test set.

Parameters:

model – Fitted model (ModelBridge) to cross validate.
folds – Number of folds. Use -1 for leave-one-out, otherwise will be k-fold.
test_selector – Function for selecting observations for the test set.

Returns:

A CVResult for each observation in the training data.

ax.modelbridge.cross_validation.cross_validate_by_trial(model: ModelBridge, trial: int = -1) → List[CVResult][source]¶

Cross validation for model predictions on a particular trial.

Uses all of the data up until the specified trial to predict each of the arms that was launched in that trial. Defaults to the last trial.

Parameters:

model – Fitted model (ModelBridge) to cross validate.
trial – Trial for which predictions are evaluated.

Returns:

A CVResult for each observation in the training data.

ax.modelbridge.cross_validation.has_good_opt_config_model_fit(optimization_config: OptimizationConfig, assess_model_fit_result: AssessModelFitResult) → bool[source]¶

Assess model fit for given diagnostics results across the optimization config metrics

Bad fit criteria: Any objective metrics are poorly fit based on the Fisher exact test p (see assess_model_fit())

TODO[]: Incl. outcome constraints in assessment

Parameters:

optimization_config – Objective/Outcome constraint metrics to assess
diagnostics – Output of compute_diagnostics

Returns:

Two dictionaries, one for good metrics, one for bad metrics, each mapping metric name to p-value

Dispatch Utilities¶

ax.modelbridge.dispatch_utils.calculate_num_initialization_trials(num_tunable_parameters: int, num_trials: Optional[int], use_batch_trials: bool) → int[source]¶

Applies rules from high to low priority

1 for batch trials.
At least 5
At most 1/5th of num_trials.
Twice the number of tunable parameters

ax.modelbridge.dispatch_utils.choose_generation_strategy(search_space: SearchSpace, *, use_batch_trials: bool = False, enforce_sequential_optimization: bool = True, random_seed: Optional[int] = None, torch_device: Optional[device] = None, no_winsorization: bool = False, winsorization_config: Optional[Union[WinsorizationConfig, Dict[str, WinsorizationConfig]]] = None, derelativize_with_raw_status_quo: bool = False, no_bayesian_optimization: bool = False, num_trials: Optional[int] = None, num_initialization_trials: Optional[int] = None, num_completed_initialization_trials: int = 0, max_initialization_trials: Optional[int] = None, max_parallelism_cap: Optional[int] = None, max_parallelism_override: Optional[int] = None, optimization_config: Optional[OptimizationConfig] = None, should_deduplicate: bool = False, use_saasbo: bool = False, verbose: Optional[bool] = None, disable_progbar: Optional[bool] = None, jit_compile: Optional[bool] = None, experiment: Optional[Experiment] = None) → GenerationStrategy[source]¶

Select an appropriate generation strategy based on the properties of the search space and expected settings of the experiment, such as number of arms per trial, optimization algorithm settings, expected number of trials in the experiment, etc.

Parameters:

search_space – SearchSpace, based on the properties of which to select the generation strategy.
use_batch_trials – Whether this generation strategy will be used to generate batched trials instead of 1-arm trials.
enforce_sequential_optimization – Whether to enforce that 1) the generation strategy needs to be updated with min_trials_observed observations for a given generation step before proceeding to the next one and 2) maximum number of trials running at once (max_parallelism) if enforced for the BayesOpt step. NOTE: max_parallelism_override and max_parallelism_cap settings will still take their effect on max parallelism even if enforce_sequential_optimization=False, so if those settings are specified, max parallelism will be enforced.
random_seed – Fixed random seed for the Sobol generator.
torch_device – The device to use for generation steps implemented in PyTorch (e.g. via BoTorch). Some generation steps (in particular EHVI-based ones for multi-objective optimization) can be sped up by running candidate generation on the GPU. If not specified, uses the default torch device (usually the CPU).
no_winsorization – Whether to apply the winsorization transform prior to applying other transforms for fitting the BoTorch model.
winsorization_config – Explicit winsorization settings, if winsorizing. Usually only upper_quantile_margin is set when minimizing, and only lower_quantile_margin when maximizing.
derelativize_with_raw_status_quo – Whether to derelativize using the raw status quo values in any transforms. This argument is primarily to allow automatic Winsorization when relative constraints are present. Note: automatic Winsorization will fail if this is set to False (or unset) and there are relative constraints present.
no_bayesian_optimization – If True, Bayesian optimization generation strategy will not be suggested and quasi-random strategy will be used.
num_trials – Total number of trials in the optimization, if known in advance.
num_initialization_trials – Specific number of initialization trials, if wanted. Typically, initialization trials are generated quasi-randomly.
max_initialization_trials – If num_initialization_trials unspecified, it will be determined automatically. This arg provides a cap on that automatically determined number.
num_completed_initialization_trials – The final calculated number of initialization trials is reduced by this number. This is useful when warm-starting an experiment, to specify what number of completed trials can be used to satisfy the initialization_trial requirement.
max_parallelism_cap – Integer cap on parallelism in this generation strategy. If specified, max_parallelism setting in each generation step will be set to the minimum of the default setting for that step and the value of this cap. max_parallelism_cap is meant to just be a hard limit on parallelism (e.g. to avoid overloading machine(s) that evaluate the experiment trials). Specify only if not specifying max_parallelism_override.
max_parallelism_override – Integer, with which to override the default max parallelism setting for all steps in the generation strategy returned from this function. Each generation step has a max_parallelism value, which restricts how many trials can run simultaneously during a given generation step. By default, the parallelism setting is chosen as appropriate for the model in a given generation step. If max_parallelism_override is -1, no max parallelism will be enforced for any step of the generation strategy. Be aware that parallelism is limited to improve performance of Bayesian optimization, so only disable its limiting if necessary.
optimization_config – used to infer whether to use MOO and will be passed in to Winsorize via its transform_config in order to determine default winsorization behavior when necessary.
should_deduplicate – Whether to deduplicate the parameters of proposed arms against those of previous arms via rejection sampling. If this is True, the generation strategy will discard generator runs produced from the generation step that has should_deduplicate=True if they contain arms already present on the experiment and replace them with new generator runs. If no generator run with entirely unique arms could be produced in 5 attempts, a GenerationStrategyRepeatedPoints error will be raised, as we assume that the optimization converged when the model can no longer suggest unique arms.
use_saasbo – Whether to use SAAS prior for any GPEI generation steps.
verbose – Whether GP model should produce verbose logs. If not None, its value gets added to model_kwargs during generation_strategy construction. Defaults to True for SAASBO, else None. Verbose outputs are currently only available for SAASBO, so if verbose is not None for a different model type, it will be overridden to None with a warning.
disable_progbar – Whether GP model should produce a progress bar. If not None, its value gets added to model_kwargs during generation_strategy construction. Defaults to True for SAASBO, else None. Progress bars are currently only available for SAASBO, so if disable_probar is not None for a different model type, it will be overridden to None with a warning.
jit_compile – Whether to use jit compilation in Pyro when SAASBO is used.
experiment – If specified, _experiment attribute of the generation strategy will be set to this experiment (useful for associating a generation strategy with a given experiment before it’s first used to gen with that experiment). Can also provide optimization_config if it is not provided as an arg to this function.

ax.modelbridge.dispatch_utils.is_saasbo(model: Models) → bool[source]¶

Transforms¶

ax.modelbridge.transforms.base¶

class ax.modelbridge.transforms.base.Transform(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: object

Defines the API for a transform that is applied to search_space, observation_features, observation_data, and optimization_config.

Transforms are used to adapt the search space and data into the types and structures expected by the model. When Transforms are used (for instance, in ModelBridge), it is always assumed that they may potentially mutate the transformed object in-place.

Forward transforms are defined for all four of those quantities. Reverse transforms are defined for observation_data and observation.

The forward transform for observation features must accept a partial observation with not all features recorded.

Forward and reverse transforms for observation data accept a list of observation features as an input, but they will not be mutated.

The forward transform for optimization config accepts the modelbridge and fixed features as inputs, but they will not be mutated.

This class provides an identify transform.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

transform_observations(observations: List[Observation]) → List[Observation][source]¶

Transform observations.

Typically done in place. By default, the effort is split into separate transformations of the features and the data.

Parameters:: observations – Observations.

Returns: transformed observations.

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

transform_search_space(search_space: SearchSpace) → SearchSpace[source]¶

Transform search space.

The transforms are typically done in-place. This calls two private methods, _transform_search_space, which transforms the core search space attributes, and _transform_parameter_distributions, which transforms the distributions when using a RobustSearchSpace.

Parameters:: search_space – The search space

Returns: transformed search space.

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

untransform_observations(observations: List[Observation]) → List[Observation][source]¶

Untransform observations.

Typically done in place. By default, the effort is split into separate backwards transformations of the features and the data.

Parameters:: observations – Observations.

Returns: untransformed observations.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.cast¶

class ax.modelbridge.transforms.cast.Cast(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Cast each param value to the respective parameter’s type/format and to a flattened version of the hierarchical search space, if applicable.

This is a default transform that should run across all models.

NOTE: In case where searh space is hierarchical and this transform is configured to flatten it:

All calls to Cast.transform_… transform Ax objects defined in terms of hierarchical search space, to their definitions in terms of flattened search space.

All calls to Cast.untransform_… cast Ax objects back to a hierarchical search space.

The hierarchical search space is seen as the “original” search space, and the flattened search space –– as “transformed”.

Transform is done in-place for casting types, but objects are copied during flattening of- and casting to the hierarchical search space.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features by adding parameter values that were removed during casting of observation features to hierarchical search space.

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features by casting parameter values to their expected types and removing parameter values that are not applicable given the values of other parameters and the hierarchical structure of the search space.

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.cap_parameter¶

class ax.modelbridge.transforms.cap_parameter.CapParameter(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Cap parameter range(s) to given values. Expects a configuration of form { parameter_name -> new_upper_range_value }.

This transform only transforms the search space.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.centered_unit_x¶

class ax.modelbridge.transforms.centered_unit_x.CenteredUnitX(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: UnitX

Map X to [-1, 1]^d for RangeParameter of type float and not log scale.

Transform is done in-place.

target_lb: float = -1.0¶

target_range: float = 2.0¶

ax.modelbridge.transforms.choice_encode¶

class ax.modelbridge.transforms.choice_encode.ChoiceEncode(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert general ChoiceParameters to integer or float ChoiceParameters.

If the parameter type is numeric (int, float) and the parameter is ordered, then the values are normalized to the unit interval while retaining relative spacing. If the parameter type is unordered (categorical) or ordered but non-numeric, this transform uses an integer encoding to 0, 1, …, n_choices - 1. The resulting choice parameter will be considered ordered iff the original parameter is.

In the inverse transform, parameters will be mapped back onto the original domain.

This transform does not transform task parameters (use TaskEncode for this).

Note that this behavior is different from that of OrderedChoiceEncode, which transforms (ordered) ChoiceParameters to integer RangeParameters (rather than ChoiceParameters).

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

class ax.modelbridge.transforms.choice_encode.OrderedChoiceEncode(search_space: SearchSpace, observations: List[Observation], modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: ChoiceEncode

Convert ordered ChoiceParameters to integer RangeParameters.

Parameters will be transformed to an integer RangeParameters, mapped from the original choice domain to a contiguous range 0, 1, …, n_choices - 1 of integers. Does not transform task parameters.

In the inverse transform, parameters will be mapped back onto the original domain.

In order to encode all ChoiceParameters (not just ordered ChoiceParameters), use ChoiceEncode instead.

Transform is done in-place.

config: TConfig¶

encoded_parameters: Dict[str, Dict[TParamValue, TParamValue]]¶

encoded_parameters_inverse: Dict[str, ClosestLookupDict]¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.choice_encode.transform_choice_values(p: ChoiceParameter) → Tuple[ndarray, ParameterType][source]¶

Transforms the choice values and returns the new parameter type.

If the choices were numeric (int or float) and ordered, then they’re cast to float and rescaled to [0, 1]. Otherwise, they’re cast to integers 0, 1, …, n_choices - 1.

ax.modelbridge.transforms.convert_metric_names¶

class ax.modelbridge.transforms.convert_metric_names.ConvertMetricNames(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert all metric names to canonical name as specified on a multi_type_experiment.

For example, a multi-type experiment may have an offline simulator which attempts to approximate observations from some online system. We want to map the offline metric names to the corresponding online ones so the model can associate them.

This is done by replacing metric names in the data with the corresponding online metric names.

In the inverse transform, data will be mapped back onto the original metric names. By default, this transform is turned off. It can be enabled by passing the “perform_untransform” flag to the config.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

untransform_observations(observations: List[Observation]) → List[Observation][source]¶

Untransform observations.

Typically done in place. By default, the effort is split into separate backwards transformations of the features and the data.

Parameters:: observations – Observations.

Returns: untransformed observations.

ax.modelbridge.transforms.convert_metric_names.convert_mt_observations(observations: List[Observation], experiment: MultiTypeExperiment) → List[Observation][source]¶: Apply ConvertMetricNames transform to observations for a MT experiment.

ax.modelbridge.transforms.convert_metric_names.tconfig_from_mt_experiment(experiment: MultiTypeExperiment) → Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]][source]¶

Generate the TConfig for this transform given a multi_type_experiment.

Parameters:: experiment – The experiment from which to generate the config.
Returns:: The transform config to pass into the ConvertMetricNames constructor.

ax.modelbridge.transforms.derelativize¶

class ax.modelbridge.transforms.derelativize.Derelativize(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: Transform

Changes relative constraints to not-relative constraints using a plug-in estimate of the status quo value.

If status quo is in-design, uses model estimate at status quo. If not, uses raw observation at status quo.

Will raise an error if status quo is in-design and model fails to predict for it, unless the flag “use_raw_status_quo” is set to True in the transform config, in which case it will fall back to using the observed value in the training data.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.int_range_to_choice¶

class ax.modelbridge.transforms.int_range_to_choice.IntRangeToChoice(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert a RangeParameter of type int to a ordered ChoiceParameter.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.int_to_float¶

class ax.modelbridge.transforms.int_to_float.IntToFloat(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert a RangeParameter of type int to type float.

Uses either randomized_rounding or default python rounding, depending on ‘rounding’ flag.

The min_choices config can be used to transform only the parameters with cardinality greater than or equal to min_choices; with the exception of log_scale parameters, which are always transformed.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.ivw¶

class ax.modelbridge.transforms.ivw.IVW(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: Transform

If an observation data contains multiple observations of a metric, they are combined using inverse variance weighting.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.ivw.ivw_metric_merge(obsd: ObservationData, conflicting_noiseless: str = 'warn') → ObservationData[source]¶

Merge multiple observations of a metric with inverse variance weighting.

Correctly updates the covariance of the new merged estimates: ybar1 = Sum_i w_i * y_i ybar2 = Sum_j w_j * y_j cov[ybar1, ybar2] = Sum_i Sum_j w_i * w_j * cov[y_i, y_j]

w_i will be infinity if any variance is 0. If one variance is 0., then the IVW estimate is the corresponding mean. If there are multiple measurements with 0 variance but means are all the same, then IVW estimate is that mean. If there are multiple measurements and means differ, behavior depends on argument conflicting_noiseless. “ignore” and “warn” will use the first of the measurements as the IVW estimate. “warn” will additionally log a warning. “raise” will raise an exception.

Parameters:

obsd – An ObservationData object
conflicting_noiseless – “warn”, “ignore”, or “raise”

ax.modelbridge.transforms.inverse_gaussian_cdf_y¶

class ax.modelbridge.transforms.inverse_gaussian_cdf_y.InverseGaussianCdfY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[base_modelbridge.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Apply inverse CDF transform to Y.

This means that we model uniform distributions as gaussian-distributed.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.log¶

class ax.modelbridge.transforms.log.Log(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Apply log base 10 to a float RangeParameter domain.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.log_y¶

class ax.modelbridge.transforms.log_y.LogY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional['base_modelbridge.ModelBridge'] = None, config: Optional[TConfig] = None)[source]¶

Bases: Transform

Apply (natural) log-transform to Y.

This essentially means that we are model the observations as log-normally distributed. If config specifies match_ci_width=True, use a matching procedure based on the width of the CIs, otherwise (the default), use the delta method,

Transform is applied only for the metrics specified in the transform config. Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[base_modelbridge.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.log_y.lognorm_to_norm(mu_ln: ndarray, Cov_ln: ndarray) → Tuple[ndarray, ndarray][source]¶

Compute mean and covariance of a MVN from those of the associated log-MVN

If Y is log-normal with mean mu_ln and covariance Cov_ln, then X ~ N(mu_n, Cov_n) with

Cov_n_{ij} = log(1 + Cov_ln_{ij} / (mu_ln_{i} * mu_n_{j})) mu_n_{i} = log(mu_ln_{i}) - 0.5 * log(1 + Cov_ln_{ii} / mu_ln_{i}**2)

ax.modelbridge.transforms.log_y.match_ci_width(mean: ndarray, variance: ndarray, transform: Callable[[ndarray], ndarray], level: float = 0.95) → ndarray[source]¶

ax.modelbridge.transforms.log_y.norm_to_lognorm(mu_n: ndarray, Cov_n: ndarray) → Tuple[ndarray, ndarray][source]¶

Compute mean and covariance of a log-MVN from its MVN sufficient statistics

If X ~ N(mu_n, Cov_n) and Y = exp(X), then Y is log-normal with

mu_ln_{i} = exp(mu_n_{i}) + 0.5 * Cov_n_{ii} Cov_ln_{ij} = exp(mu_n_{i} + mu_n_{j} + 0.5 * (Cov_n_{ii} + Cov_n_{jj})) * (exp(Cov_n_{ij}) - 1)

ax.modelbridge.transforms.logit¶

class ax.modelbridge.transforms.logit.Logit(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Apply logit transfor to a float RangeParameter domain.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.map_unit_x¶

class ax.modelbridge.transforms.map_unit_x.MapUnitX(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: UnitX

A UnitX transform for map parameters in observation_features, identified as those that are not part of the search space. Since they are not part of the search space, the bounds are inferred from the set of observation features. Only observation features are transformed; all other objects undergo identity transform.

target_lb: float = 0.0¶

target_range: float = 1.0¶

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶: Untransform if the parameter exists in the observation feature. Note the extra existence check from UnitX.untransform_observation_features because when map key features are used, they may not exist after generation or best point computations.

ax.modelbridge.transforms.merge_repeated_measurements¶

class ax.modelbridge.transforms.merge_repeated_measurements.MergeRepeatedMeasurements(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Merge repeated measurements for to obtain one observation per arm.

Repeated measurements are merged via inverse variance weighting (e.g. over different trials). This intentionally ignores the trial index and assumes stationarity.

TODO: Support inverse variance weighting correlated outcomes (full covariance).

Note: this is not reversible.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observations(observations: List[Observation]) → List[Observation][source]¶

Transform observations.

Typically done in place. By default, the effort is split into separate transformations of the features and the data.

Parameters:: observations – Observations.

Returns: transformed observations.

ax.modelbridge.transforms.metrics_as_task¶

class ax.modelbridge.transforms.metrics_as_task.MetricsAsTask(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert metrics to a task parameter.

For each metric to be used as a task, the config must specify a list of the target metrics for that particular task metric. So,

config = {

‘metric_task_map’: {: ‘metric1’: [‘metric2’, ‘metric3’], ‘metric2’: [‘metric3’],

}

means that metric2 will be given additional task observations of metric1, and metric3 will be given additional task observations of both metric1 and metric2. Note here that metric2 and metric3 are the target tasks, and this map is from base tasks to target tasks.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶: If transforming features without data, map them to the target.

transform_observations(observations: List[Observation]) → List[Observation][source]¶

Transform observations.

Typically done in place. By default, the effort is split into separate transformations of the features and the data.

Parameters:: observations – Observations.

Returns: transformed observations.

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

untransform_observations(observations: List[Observation]) → List[Observation][source]¶

Untransform observations.

Typically done in place. By default, the effort is split into separate backwards transformations of the features and the data.

Parameters:: observations – Observations.

Returns: untransformed observations.

ax.modelbridge.transforms.one_hot¶

class ax.modelbridge.transforms.one_hot.OneHot(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert categorical parameters (unordered ChoiceParameters) to one-hot-encoded parameters.

Does not convert task parameters.

Parameters will be one-hot-encoded, yielding a set of RangeParameters, of type float, on [0, 1]. If there are two values, one single RangeParameter will be yielded, otherwise there will be a new RangeParameter for each ChoiceParameter value.

In the reverse transform, floats can be converted to a one-hot encoded vector using one of two methods:

Strict rounding: Choose the maximum value. With levels [‘a’, ‘b’, ‘c’] and: float values [0.2, 0.4, 0.3], the restored parameter would be set to ‘b’. Ties are broken randomly, so values [0.2, 0.4, 0.4] is randomly set to ‘b’ or ‘c’.
Randomized rounding: Sample from the distribution. Float values: [0.2, 0.4, 0.3] are transformed to ‘a’ w.p. 0.2/0.9, ‘b’ w.p. 0.4/0.9, or ‘c’ w.p. 0.3/0.9.

Type of rounding can be set using transform_config[‘rounding’] to either ‘strict’ or ‘randomized’. Defaults to strict.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

class ax.modelbridge.transforms.one_hot.OneHotEncoder(values: List[T])[source]¶

Bases: object

Joins the two encoders needed for OneHot transform.

property classes: ndarray¶: Return number of classes discovered while fitting transform.

int_encoder: LabelEncoder¶

inverse_transform(encoded_labels: List[T]) → List[T][source]¶: Inverse transorm a list of one hot encoded labels.

label_binarizer: LabelBinarizer¶

transform(labels: List[T]) → ndarray[source]¶: One hot encode a list of labels.

ax.modelbridge.transforms.percentile_y¶

class ax.modelbridge.transforms.percentile_y.PercentileY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Map Y values to percentiles based on their empirical CDF.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.power_transform_y¶

class ax.modelbridge.transforms.power_transform_y.PowerTransformY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: Transform

Transform the values to look as normally distributed as possible.

This fits a power transform to the data with the goal of making the transformed values look as normally distributed as possible. We use Yeo-Johnson (https://www.stat.umn.edu/arc/yjpower.pdf), which can handle both positive and negative values.

While the transform seems to be quite robust, it probably makes sense to apply a bit of winsorization and also standardize the inputs before applying the power transform. The power transform will automatically standardize the data so the data will remain standardized.

The transform can’t be inverted for all values, so we apply clipping to move values to the image of the transform. This behavior can be controlled via the clip_mean setting.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.remove_fixed¶

class ax.modelbridge.transforms.remove_fixed.RemoveFixed(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Remove fixed parameters.

Fixed parameters should not be included in the SearchSpace. This transform removes these parameters, leaving only tunable parameters.

Transform is done in-place for observation features.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.rounding¶

ax.modelbridge.transforms.rounding.contains_constrained_integer(search_space: SearchSpace, transform_parameters: Set[str]) → bool[source]¶

Check if any integer parameters are present in parameter_constraints.

Order constraints are ignored since strict rounding preserves ordering.

ax.modelbridge.transforms.rounding.randomized_onehot_round(x: ndarray) → ndarray[source]¶: Randomized rounding of x to a one-hot vector. x should be 0 <= x <= 1.

ax.modelbridge.transforms.rounding.randomized_round(x: float) → int[source]¶: Randomized round of x

ax.modelbridge.transforms.rounding.randomized_round_parameters(parameters: Dict[str, Optional[Union[str, bool, float, int]]], transform_parameters: Set[str]) → Dict[str, Optional[Union[str, bool, float, int]]][source]¶

ax.modelbridge.transforms.rounding.strict_onehot_round(x: ndarray) → ndarray[source]¶: Round x to a one-hot vector by selecting the max element. Ties broken randomly.

ax.modelbridge.transforms.search_space_to_choice¶

class ax.modelbridge.transforms.search_space_to_choice.SearchSpaceToChoice(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Replaces the search space with a single choice parameter, whose values are the signatures of the arms observed in the data.

This transform is meant to be used with ThompsonSampler.

Choice parameter will be unordered unless config[“use_ordered”] specifies otherwise.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.search_space_to_float¶

class ax.modelbridge.transforms.standardize_y.StandardizeY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[base_modelbridge.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Standardize Y, separately for each metric.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[base_modelbridge.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.standardize_y.compute_standardization_parameters(Ys: DefaultDict[Union[str, Tuple[str, Optional[Union[str, bool, float, int]]]], List[float]]) → Tuple[Dict[Union[str, Tuple[str, str]], float], Dict[Union[str, Tuple[str, str]], float]][source]¶: Compute mean and std. dev of Ys.

ax.modelbridge.transforms.stratified_standardize_y¶

class ax.modelbridge.transforms.stratified_standardize_y.StratifiedStandardizeY(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Standardize Y, separately for each metric and for each value of a ChoiceParameter.

The name of the parameter by which to stratify the standardization can be specified in config[“parameter_name”]. If not specified, will use a task parameter if search space contains exactly 1 task parameter, and will raise an exception otherwise.

The stratification parameter must be fixed during generation if there are outcome constraints, in order to apply the standardization to the constraints.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observations(observations: List[Observation]) → List[Observation][source]¶

Transform observations.

Typically done in place. By default, the effort is split into separate transformations of the features and the data.

Parameters:: observations – Observations.

Returns: transformed observations.

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Transform optimization config.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: optimization_config – The optimization config

Returns: transformed optimization config.

untransform_observations(observations: List[Observation]) → List[Observation][source]¶

Untransform observations.

Typically done in place. By default, the effort is split into separate backwards transformations of the features and the data.

Parameters:: observations – Observations.

Returns: untransformed observations.

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

ax.modelbridge.transforms.task_encode¶

class ax.modelbridge.transforms.task_encode.TaskEncode(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: OrderedChoiceEncode

Convert task ChoiceParameters to integer-valued ChoiceParameters.

Parameters will be transformed to an integer ChoiceParameter with property is_task=True, mapping values from the original choice domain to a contiguous range integers 0, 1, …, n_choices-1.

In the inverse transform, parameters will be mapped back onto the original domain.

Transform is done in-place.

config: TConfig¶

encoded_parameters: Dict[str, Dict[TParamValue, TParamValue]]¶

encoded_parameters_inverse: Dict[str, ClosestLookupDict]¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

ax.modelbridge.transforms.trial_as_task¶

class ax.modelbridge.transforms.trial_as_task.TrialAsTask(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Convert trial to one or more task parameters.

How trial is mapped to parameter is specified with a map like {parameter_name: {trial_index: level name}}. For example, {“trial_param1”: {0: “level1”, 1: “level1”, 2: “level2”},} will create choice parameters “trial_param1” with is_task=True. Observations with trial 0 or 1 will have “trial_param1” set to “level1”, and those with trial 2 will have “trial_param1” set to “level2”. Multiple parameter names and mappings can be specified in this dict.

The trial level mapping can be specified in config[“trial_level_map”]. If not specified, defaults to a parameter with a level for every trial index.

For the reverse transform, if there are multiple mappings in the transform the trial will not be set.

The created parameter will be given a target value that will default to the lowest trial index in the mapping, or can be provided in config[“target_trial”].

Will raise if trial not specified for every point in the training data.

Transform is done in-place.

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.unit_x¶

class ax.modelbridge.transforms.unit_x.UnitX(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Map X to [0, 1]^d for RangeParameter of type float and not log scale.

Uses bounds l <= x <= u, sets x_tilde_i = (x_i - l_i) / (u_i - l_i). Constraints wTx <= b are converted to gTx_tilde <= h, where g_i = w_i (u_i - l_i) and h = b - wTl.

Transform is done in-place.

target_lb: float = 0.0¶

target_range: float = 1.0¶

transform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Transform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features

Returns: transformed observation features

untransform_observation_features(observation_features: List[ObservationFeatures]) → List[ObservationFeatures][source]¶

Untransform observation features.

This is typically done in-place. This class implements the identity transform (does nothing).

Parameters:: observation_features – Observation features in the transformed space

Returns: observation features in the original space

ax.modelbridge.transforms.utils¶

class ax.modelbridge.transforms.utils.ClosestLookupDict(*args: Any, **kwargs: Any)[source]¶

Bases: dict

A dictionary with numeric keys that looks up the closest key.

ax.modelbridge.transforms.utils.construct_new_search_space(search_space: SearchSpace, parameters: List[Parameter], parameter_constraints: Optional[List[ParameterConstraint]] = None) → SearchSpace[source]¶

Construct a search space with the transformed arguments.

If the search_space is a RobustSearchSpace, this will use its environmental variables and distributions, and remove the environmental variables from parameters before constructing.

Parameters:

parameters – List of transformed parameter objects.
parameter_constraints – List of parameter constraints.

Returns:

The new search space instance.

ax.modelbridge.transforms.utils.derelativize_optimization_config_with_raw_status_quo(optimization_config: OptimizationConfig, modelbridge: modelbridge_module.base.ModelBridge, observations: Optional[List[Observation]]) → OptimizationConfig[source]¶: Derelativize optimization_config using raw status-quo values

ax.modelbridge.transforms.utils.get_data(observation_data: List[ObservationData], metric_names: Optional[List[str]] = None) → Dict[str, List[float]][source]¶: Extract all metrics if metric_names is None.

ax.modelbridge.transforms.utils.match_ci_width_truncated(mean: float, variance: float, transform: Callable[[float], float], level: float = 0.95, margin: float = 0.001, lower_bound: float = 0.0, upper_bound: float = 1.0, clip_mean: bool = False) → Tuple[float, float][source]¶

Estimate a transformed variance using the match ci width method.

See log_y transform for the original. Here, bounds are forced to lie within a [lower_bound, upper_bound] interval after transformation.

ax.modelbridge.winsorize¶

class ax.modelbridge.transforms.winsorize.Winsorize(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[Dict[str, Optional[Union[int, float, str, AcquisitionFunction, Dict[int, Any], Dict[str, Any], OptimizationConfig, WinsorizationConfig]]]] = None)[source]¶

Bases: Transform

Clip the mean values for each metric to lay within the limits provided in the config. The config can contain either or both of two keys: - "winsorization_config", corresponding to either a single

WinsorizationConfig, which, if provided will be used for all metrics; or a mapping Dict[str, WinsorizationConfig] between each metric name and its WinsorizationConfig.

"derelativize_with_raw_status_quo", indicating whether to use the raw
status-quo value for any derelativization. Note this defaults to False, which is unsupported and simply fails if derelativization is necessary. The user must specify derelativize_with_raw_status_quo = True in order for derelativization to succeed. Note that this must match the use_raw_status_quo value in the Derelativize config if used.

For example, {"winsorization_config": WinsorizationConfig(lower_quantile_margin=0.3)} will specify the same 30% winsorization from below for all metrics, whereas ``` {

“winsorization_config”: {

“metric_1”: WinsorizationConfig(lower_quantile_margin=0.2), “metric_2”: WinsorizationConfig(upper_quantile_margin=0.1),

}

}¶

will winsorize 20% from below for metric_1 and 10% from above from metric_2. Additional metrics won’t be winsorized.

You can also determine the winsorization cutoffs automatically without having an OptimizationConfig by passing in AUTO_WINS_QUANTILE for the quantile you want to winsorize. For example, to automatically winsorize large values:

"m1": WinsorizationConfig(upper_quantile_margin=AUTO_WINS_QUANTILE).

This may be useful when fitting models in a notebook where there is no corresponding OptimizationConfig.

Additionally, you can pass in winsorization boundaries lower_boundary and upper_boundary``that specify a maximum allowable amount of winsorization. This is discouraged and will eventually be deprecated as we strongly encourage that users allow ``Winsorize to automatically infer these boundaries from the optimization config.

cutoffs: Dict[str, Tuple[float, float]]¶

ax.modelbridge.transforms.relativize¶

class ax.modelbridge.transforms.relativize.Relativize(search_space: Optional[SearchSpace] = None, observations: Optional[List[Observation]] = None, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, config: Optional[TConfig] = None)[source]¶

Bases: Transform

Change the relative flag of the given relative optimization configuration to False. This is needed in order for the new opt config to pass ModelBridge that requires non-relativized opt config.

Also transforms absolute data and opt configs to relative.

Requires a modelbridge with a status quo set to work.

MISSING_STATUS_QUO_ERROR = 'Cannot relativize data without status quo data'¶

config: TConfig¶

modelbridge: Optional[modelbridge_module.base.ModelBridge]¶

transform_observations(observations: List[Observation]) → List[Observation][source]¶

Transform observations.

Typically done in place. By default, the effort is split into separate transformations of the features and the data.

Parameters:: observations – Observations.

Returns: transformed observations.

transform_optimization_config(optimization_config: OptimizationConfig, modelbridge: Optional[modelbridge_module.base.ModelBridge] = None, fixed_features: Optional[ObservationFeatures] = None) → OptimizationConfig[source]¶

Change the relative flag of the given relative optimization configuration to False. This is needed in order for the new opt config to pass ModelBridge that requires non-relativized opt config.

Parameters:: opt_config – Optimization configuration relative to status quo.
Returns:: Optimization configuration relative to status quo with relative flag equal to false.

untransform_observations(observations: List[Observation]) → List[Observation][source]¶: Unrelativize the data

untransform_outcome_constraints(outcome_constraints: List[OutcomeConstraint], fixed_features: Optional[ObservationFeatures] = None) → List[OutcomeConstraint][source]¶

Untransform outcome constraints.

If outcome constraints are modified in transform_optimization_config, this method should reverse the portion of that transformation that was applied to the outcome constraints.

Strategies¶

ax.modelbridge.strategies.alebo¶

class ax.modelbridge.strategies.alebo.ALEBOStrategy(D: int, d: int, init_size: int, name: str = 'ALEBO', dtype: dtype = torch.float64, device: device = device(type='cpu'), random_kwargs: Optional[Dict[str, Any]] = None, gp_kwargs: Optional[Dict[str, Any]] = None, gp_gen_kwargs: Optional[Dict[str, Any]] = None)[source]¶

Bases: GenerationStrategy

Generation strategy for Adaptive Linear Embedding BO.

Both quasirandom initialization and BO are done with the same random projection. All function evaluations are done within that projection.

Parameters:

D – Dimensionality of high-dimensional space
d – Dimensionality of low-dimensional space
init_size – Size of random initialization
name – Name of strategy
dtype – torch dtype
device – torch device
random_kwargs – kwargs passed along to random model
gp_kwargs – kwargs passed along to GP model
gp_gen_kwargs – kwargs passed along to gen call on GP

clone_reset() → ALEBOStrategy[source]¶: Copy without state.

gen_projection(d: int, D: int, dtype: dtype, device: device) → Tensor[source]¶: Generate the projection matrix B as a (d x D) tensor

ax.modelbridge.strategies.alebo.get_ALEBO(experiment: Experiment, search_space: SearchSpace, data: Data, B: Tensor, **model_kwargs: Any) → TorchModelBridge[source]¶

ax.modelbridge.strategies.alebo.get_ALEBOInitializer(search_space: SearchSpace, B: ndarray, seed: Optional[int] = None, **model_kwargs: Any) → RandomModelBridge[source]¶

class ax.modelbridge.strategies.rembo.HeSBOStrategy(D: int, d: int, init_per_proj: int, k: int = 1, name: str = 'HeSBO', dtype: dtype = torch.float64, device: device = device(type='cpu'), gp_kwargs: Optional[Dict[str, Any]] = None)[source]¶

Bases: REMBOStrategy

Generation strategy for HeSBO.

Parameters:

D – Dimensionality of high-dimensional space
d – Dimensionality of low-dimensional space
k – Number of random projections
init_per_proj – Number of arms to use for random initialization of each of the k projections.
name – Name of strategy
dtype – torch dtype
device – torch device
gp_kwargs – kwargs sent along to the GP model

get_projection(D: int, d: int, dtype: dtype, device: device) → Tuple[Tensor, List[Tuple[float, float]]][source]¶

Generate the projection matrix A as a (D x d) tensor

Also return the box bounds for the low-d space.

class ax.modelbridge.strategies.rembo.REMBOStrategy(D: int, d: int, init_per_proj: int, k: int = 4, name: str = 'REMBO', dtype: dtype = torch.float64, device: device = device(type='cpu'), gp_kwargs: Optional[Dict[str, Any]] = None)[source]¶

Bases: GenerationStrategy

Generation strategy for REMBO.

Both quasirandom initialization and BO are done with the same random projection. As is done in the REMBO paper, k independent optimizations are done, each with an independently generated projection.

Parameters:

D – Dimensionality of high-dimensional space
d – Dimensionality of low-dimensional space
k – Number of random projections
init_per_proj – Number of arms to use for random initialization of each of the k projections.
name – Name of strategy
dtype – torch dtype
device – torch device
gp_kwargs – kwargs sent along to the GP model

clone_reset() → REMBOStrategy[source]¶: Copy without state.

gen(experiment: Experiment, data: Optional[Data] = None, n: int = 1, **kwargs: Any) → GeneratorRun[source]¶: Generate new points, rotating through projections each time.

get_projection(D: int, d: int, dtype: dtype, device: device) → Tuple[Tensor, List[Tuple[float, float]]][source]¶

Generate the projection matrix A as a (D x d) tensor

Also return the box bounds for the low-d space.

property model_transitions: List[int]¶: Generator changes every iteration with rotating strategy

ax.modelbridge.strategies.rembo.get_REMBO(experiment: Experiment, data: Data, A: Tensor, initial_X_d: Tensor, bounds_d: List[Tuple[float, float]], search_space: Optional[SearchSpace] = None, dtype: dtype = torch.float64, device: device = device(type='cpu'), **model_kwargs: Any) → TorchModelBridge[source]¶: Instantiates a BotorchModel.

ax.modelbridge.strategies.rembo.get_rembo_initializer(search_space: SearchSpace, A: ndarray, bounds_d: List[Tuple[float, float]], seed: Optional[int] = None, **kwargs: Any) → RandomModelBridge[source]¶

Instantiates a uniform random generator.

Parameters:

search_space – Search space.
A – Projection matrix.
bounds_d – Bounds in low-d space.
seed – seed.
kwargs – kwargs

Returns:

RandomModelBridge, with REMBOInitializer as model.